To keep it simple.... 1. has to be a no, unless you have an alternative method of knowing what is on your tape volumes... with the volume history file you wouldn't know which is your dbbackup tape(s)
2. You do not need to know the admin password as you do the restore using dsmserv interactively with paramters. once the restore is complete you can then run dsmserv to open an interactive session to create new or modiy your admin accounts. 3. I am certain I have read old articles on here and the answser has been no. 4. To detemine whether or not there any special considerations depends on what you are trying to achieve. If you are writing a D/R documentation, then the first and most important consideration in my viewpoint is having the TSM software available offsite. You can't restore your TSM service without the software in the first place! Following this you need your volume history (the device config file is up to opinion but it is a nicety) available offsite.You can't restore your TSM service without the software in the first place! Hope this falls in line with your thoughts. Cheers Andy Wilcox Midrange Services Aquila Networks Services Ltd > -----Original Message----- > From: Gill, Geoffrey L. [SMTP:[EMAIL PROTECTED] > Sent: 28 March 2003 14:49 > To: [EMAIL PROTECTED] > Subject: Returned mail - Repost > > For whatever reason I had this returned to me saying I was not authorized > to > send to the list so I'm going to try again. > > A few questions to help me with a document I need to put together and > verify > my own beliefs. Don't want to put out bogus info. > > 1. If you do not have the volhist file, but you do have all the tapes, is > it > possible to restore the "last" dbbackup to the TSM server? > > 2. Is it possible to restore the DB to a server if you don't have an admin > user and password? > > 3. Is there a utility to read any tapes outside of TSM? > > 4. Any other special considerations I need to know? > > > Geoff Gill > TSM Administrator > NT Systems Support Engineer > SAIC > E-Mail: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > Phone: (858) 826-4062 > Pager: (877) 905-7154 > > > ************************************************************************** > ************************** > Confidentiality: This e-mail and any files transmitted with it are > confidential and intended solely for the use of the individual or entity > to whom they are addressed. If you have received this e-mail in error, > use of this information (including disclosure, copying or distribution) > may be unlawful. Please notify [EMAIL PROTECTED] and > delete the message immediately. > > Security: Internet e-mail is not a 100% secure communications medium. > > Viruses: This e-mail (and any attachments) has been checked (using Sophos > Sweep 3.63 + patches) and found to be clean from any virus infection > before leaving. > Therefore neither Aquila Networks Services Ltd nor Midlands Electricity > plc or any of their group undertakings (as defined by the Companies Act > 1989) (together referred to as the "Companies") accept legal > responsibility for this message or liability for the consequences of any > computer viruses which may have been transmitted by this e-mail. > > Monitoring: All electronic communications with the Companies may be > monitored in accordance with the UK Regulation of Investigatory Powers > Act, Lawful Business Practice Regulations, 2000. If you do not consent to > such monitoring, you should contact the sender of this e-mail. > > Aquila Networks Services Limited, > Registered office: Whittington Hall, Whittington, Worcester, WR5 2RB > Registered in England and Wales number 3600545 > This e-mail may be sent on behalf of any of the Companies. > ************************************************************************** > **************************