Good Afternoon. I'm running TSM 5.2.2 server on an AIX machine running AIX 5.2. I have a UNIX machine behind the firewall which I currently backup over port 6150 without a problem using "ServerInitiated Backups". The Passwordaccess is set to generate. To setup the UNIX machine the 1st time I went to the command line(on client), typed dsmc, kickoff the scheduled backup from the server and it prompted for the password. I entered the PW and the backup took off. After the 1st time it(password entered) the backups run each day with no intervention. The firewall has only port 6150 open in 1 direction(server to client).
How do you setup an INTEL machine with "ServerOnly", server initiated backups? The machine is a Windows 2000 server running TSM 5.2.2(client). On the server I have the client setup with the following ========================== Session Initiation ServerOnly HLADDRESS 158.187.101.99 LLADDRESS 6150 ============================= On the client do I need to add a line in the dsm.opt "sessioninitiation serveronly" In the dsm.opt currently I have Passwordacces generate tcpclientp 6150 SCHEDMODE polling (assume that client is waiting for server to contact it) Is there any other lines I need to add? Also how is the password generated the 1st time so the communications between the server and client is established when the server contacts the client. I have not setup a windows machine through the firewall and the documentation seemed easier to understand with AIX than with INTEL. Thanks Have a Great Day, Eric
