I hope it worked for you. In the past I have cached out the volume where a problem was reported (both the one in the 'real slot' and the one that TSM says should be in the slot). Sometimes I had to check out several until there were no more 'unknown' tapes in the library. Then check them all back in after doing a TSM audit checkl=barcode. It did take some time, but it cured the issue for me. Just my .02 pesos worth! (this was on an IBM 3593 aka ADIC 100)
... I do remember one time I got so frustrated, I took out all the tapes, shut down tsm server (windows), power cycled the 3583, and brought it all back up with an empty library. Did a AUDIT LIBR in tsm, the loaded all the tapes back into TSM (using the bulk door and TSM commands). ... That cured the problem and let me have enough time for my frustration to subside ... I think that these processed did for me what forcing an 'inventory from the library side' did for you. Sounds like your method had less frustration after you found the right answer. ... Jack -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Nancy L Backhaus Sent: Tuesday, April 11, 2006 7:29 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8300E - I/O error on library desc= the destination slot or drive was full in an attemt to move a volume Just an update... I had already tried auditing the library with checklabel=barcode for a first fix attempt and still saw the error. Yesterday afternoon working with ADIC tech support we ran an "inventory process from the library side" and then reran the audit on TSM server checklabel=barcode....and no errors after that. (fingers crossed) Nancy Backhaus Enterprise Systems HealthNow, NY 716-887-7979 Zoltan Forray/AC/VCU <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> 04/10/2006 04:39 PM Please respond to "ADSM: Dist Stor Manager" To: ADSM-L@VM.MARIST.EDU cc: Subject: Re: ANR8300E - I/O error on library desc= the destination slot or drive was full in an attemt to move a volume Been there - Done that. Seen it numerous times. Just perform an audit of your library, scanning the barcodes. There is an out-of-sync problem in the library inventory (internal). There is a tape who's barcode it didn't read during the last scan pass or you had some kind of library error. In fact, I just did one......................................... AUDIT LIBR <insert your library name here> checkl=b Nancy L Backhaus <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> 04/10/2006 03:15 PM Please respond to "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8300E - I/O error on library desc= the destination slot or drive was full in an attemt to move a volume Anyone see this error below? Looking for direction/suggestions? The tape(s) do actually does dismount. The issue is occurring on different drives. All volumes are online, no unavail, no damaged, etc. I audited the library, it was a successful audit checklabel=barcode. **Background - Updated a week ago Library firmware from 3.1 to 4.1 and then backed out the library firmware code because internal barcode on the tapes could not be read. So we went back to our 3.1 firmware and thought we were ok again. Also, a couple other ADIC clients reported similiar issues with new firmware. Then we started seeing this error today with TSM sense data. Errpt - showing nothing Only TSM is reporting error, the library and aix are reporting no errors. Version: TSM Version - 5.3.2.2 AIX - 5.3 Mod 3 ADIC I2000 Scalar Library(LTO 2 drives), LTO2 tapes actlog: 04/10/06 13:16:44 ANR8300E I/O error on library BLUE (OP=00006C03, CC=315, KEY=05, ASC=3B, ASCQ=0D, SENSE=70.00.05.00.00.00.00.0A.0- 0.00.00.00.3B.0D.00.CF.00.06., Description=The destination slot or drive was full in an attempt to move a volume). Refer to Appendix D in the 'Messages' manual for recommended action. (PROCESS: 302) 04/10/06 13:16:44 ANR8469E Dismount of LTO volume TS1430 from drive DRIVE13 (/dev/rmt13) in library BLUE01 failed. (PROCESS: 302) Sense Data= Key (05) = illegal request CC(315)= dest slot was full ASC=3B, ASCQ=OD = medium destination element is full Nancy Backhaus Privileged and Confidential: The information contained in this e-mail message is intended only for the personal and confidential use of the intended recipient(s). If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail, and delete the original message.