Thanks for the shortcut. It will have to be done in phases, since the 3494 has 4-types of tapes, besides just dealing with scratch vs private.
William Boyer <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> 03/20/2007 06:38 PM Please respond to "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> To ADSM-L@VM.MARIST.EDU cc Subject Re: [ADSM-L] Moving Library Owner/Manager You don't need to generate this list and do the CHECKIN for each library clients' tapes with OWNER...Just checkin all the tapes in the library as PRIVATE. At this point they will show with no owner. Then on the library client run an AUDIT LIBRARY. It seems that the entire volume inventory from the client is exchanged with the LM. Tapes checked in to the library are then changed to the OWNER of the client and a volume history entry of TYPE=REMOTE is created for each volume defined to the client. Do this from each of the library clients and the LM will be in-sync. Then a select command can be run to list all the library volumes in private status without an owner. These are then probably scratch tapes and you can UPD LIBV STATUS=SCRATCH. Bill Boyer DSS, Inc. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Suad Musovich Sent: Tuesday, March 20, 2007 6:27 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: Moving Library Owner/Manager There's not a single tasklist you can work on because of differing environments (are both TSM servers using the libraries themselves? is there non-standard inventory... like backupsets?) The last time I did it, it was something like this. On the old Library Manager (LM)... - Identify(generate a list) and checkout (rem=no) all Private volumes, from that library. - Then do the same with scratch carts. - Delete the paths/drives/library definitions Then, if required, make the new TSM server the library control (if the library needs to record which host is the LM) On the new LM ... - Define the library/device class/drives/paths (remember to add all remote TSM server paths) - Checkin all private carts (from the list, you generated, including which TSM server is the owner) - Then the checkin all scratch carts. On the old LM .. - define shared library with -primarylibman is the new LM Then you need to check if any carts thats are in inventory but did not successfully get checked in (the most common examples are backupsets and DB backups. I ended up doing a lot of pre-work(migrations etc) and needed to draft quite a detailed implementation/backout plan, as the enviroment was non trivial. If you have multiple TSM servers sharing a library, I would personally define a dedicated TSM LM instance (maybe on a separate port) that you can easily move with minimal planning, in future. Cheers, Suad -- "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 21/03/2007 05:36:37 AM: > We are working to replace our two AIX TSM servers (old, slow, still using > SSA disk, etc) with new x86/Linux boxen. > > Unfortunately, the tape library owners/managers are these two AIX boxes. > > Has anyone here gone through changing which TSM server owns a tape > library, that can offer some hints, tips, suggestions ? > > How did you accomplish this? What steps did you take ahead of time?