Hi, Audit DB is a single threaded slow operation and there are no tricks besides auditing parts of the DB like ex. Storage. Look at R Sims Quickfacrs and search for "partial audits".
//Henrik -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Andy Huebner Sent: den 6 december 2007 00:17 To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] DB Audit I am not sure there is an answer for this problem: We are running a "test" audit before we upgrade our TSM server. The audit appears that it will take about 200 hours to complete. Upgrading the DB and starting TSM took 15 minutes total. The software is AIX 5.3 running TSM 5.4.0.0. The hardware is a p550 with 4GB RAM & DMX3 disks. The DB is about 120GB on 14 raw volumes; the log is on a file system. There are about 240 million objects in the DB. During the audit the CPU is running mostly in the 10-15% range, sometimes spiking higher. The disks are pushing less than 1MBps each. Is there a trick to make the audit use the available hardware and run faster? Thanks, This e-mail (including any attachments) is confidential and may be legally privileged. If you are not an intended recipient or an authorized representative of an intended recipient, you are prohibited from using, copying or distributing the information in this e-mail or its attachments. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete all copies of this message and any attachments. Thank you. ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorised use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you.