Actually if all that was added was extra slots in the second frame, all that needs to be run is an "audit library" command. This will force your library to reaudit your current inventory including the new empty slots. If new drives were added as well, just define the new paths and drives to the existing library. No need to delete paths/drives/library for this. I've done it several times when we've upgraded our scalar 10k with new cabinets.
Mel Dennis Backup Systems Engineer Siemens IT Solutions and Services, Inc. PGST Data Center Operations 4400 Alafaya Trail MC Q1-108 Orlando, FL 32826 Tel.: 407-736-2360 Mob: 321-356-9366 Fax: 407-243-0260 mailto:[EMAIL PROTECTED] www.usa.siemens.com/it-solutions -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Stapleton, Mark Sent: Thursday, December 06, 2007 2:44 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8314E Library is Full Error From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Maura Adams > Thanks for the info. I just heard back from IBM support and because our > second frame to the library was added after our original install, TSM > does not see it. We need to take an outage and delete/define all paths, > library, drives and check all tapes back in. A little bit ugly. Not ugly at all, and no outage is required if you do this at night, since tape drives are usually quiet during that time anyway. Write a batch file that does the following: delete path (all tape drives) delete path (for library) delete drive (all tape drives) delete library (library) define library define path (for library) define drive (all tape drives) define path (all tape drives) checkin libv (library) search=yes status=scratch checkl=barcode checkin libv (library) search=yes status=private checkl=barcode Call the batch file "library_redo". Run the file as a macro. This should all run within a minute or two. Do it while all tape drives are quiet. -- Mark Stapleton Berbee (a CDW company) System engineer 7145 Boone Avenue North, Suite 140 Brooklyn Park MN 55428-1511 763-592-5963 www.berbee.com