. o 0 (why must I be onsite to do this?) I had thought opening the door of the 3584lib in paused mode would have caused a quick re-inventory? I opened to see if any tapes didn't have a label somehow. Maybe the barcode scan it did after the door was closed isn't for inventory purposes?
I'll run the inventory command run from the console and then hopefully the audit will succeed and do what you mentioned below. Thanks, Bob -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Prather, Wanda Sent: Wednesday, May 04, 2011 8:52 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Tape issues with 3584 library Answers in line below... I have a weird situation taking place. I believe there are two distinct issues but they might be related. A gripper issue caused a few tapes to be mishandled and dropped into the library. I ended up checking them out but cannot fix these issues: When I run a "show slots 3584lib" there are two anomalies: Slot 330, status Allocated, element number 1355, barcode not present, barcode value <>, devT=ANY, mediaT=-1, elemT=ANY Slot 408, status Allocated, element number 1433, barcode not present, barcode value <>, devT=LTO, mediaT=417, elemT=ANY When I log onto the 3584 library web console and display data cartridges I cannot locate those elements or verify that there are tapes really at those locations. If I run a library Audit it fails with a tape device error as it is apparently attempting to load those "tapes" to verify the label. However the tape library itself never attempts to mount a tape as I think it knows there aren't any tapes at those locations. How can I fix this issue? ----------------------------------------------------------------------------------------------------------- a) In the 3584 web interface, run an INVENTORY (not with audit) against all frames. That will cause the library to rescan the barcodes. The library's 3584 on-board inventory will then be correct. b) In TSM, run: audit library yourlibnamehere checklabel=barcode That causes TSM to upload the inventory from the 3584, so its inventory will match the 3584's, without loading the tapes to read the internal label. - the TSM audit will not run if there are other tape processes running -any tapes that were checked in to TSM but are not actually in the library will be automatically checked out -tapes that are in the library but are not checked in to TSM will NOT automatically be checked in, so you may also need: 1) checkin libv yourlibnamehere search=yes status=scratch checklabel=barcode wait=0 2) checkin libv yourlibnamehere search=yes status=private checklabel=barcode wait=0 ---------------------------------------------------------------------------------------------------------------------------------- W