As an option you can use the search=bulk, and the troublesome tape once checked into the library can be updated with upd v XXXX access=unav But your are correct Jeanne, the search=yes should have picked them up since you "inserted them" into the library.
Hope that helps. On Tue, Dec 23, 2014 at 10:36 AM, Jeanne Bruno <jbr...@cenhud.com> wrote: > Hello. The library. > > I put tape on the door (the i/o hopper...ours holds 6 tapes) of the > DS3512, closed the hopper, then using the little gui on the DS3512, I > choose the library I want them checked into. Then I hit 'insert media', > picked the tape from the list and hit ok. (heard the arm grab the tape and > put somewhere in the library). > Came back to the admin server and typed my checked in command. > > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > Steven Langdale > Sent: Tuesday, December 23, 2014 12:02 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] checkin libv command > > Where are these tapes you want to label? In the library or in the I/O > hopper? > > On Tue, 23 Dec 2014 16:38 Jeanne Bruno <jbr...@cenhud.com> wrote: > > > Hello. hhmmm. I tried status=private. Results were the same. > > > > I tried: > > label libv xxxxxx search=yes checkin=scratch labels=b > > volr=A00560L5,A00561L5 > > same results. > > > > Also, the maxscr on all our copy pools are fine. (difference of > > allowed and used is plenty) > > > > I have tried status=bulk in the past, on a tape I had issues with > > earlier in the year, but that tape is just sitting in the library and > > no backup process has ever used it. So I'm hesitant to use 'bulk'. > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf > > Of Huebner, Andy > > Sent: Tuesday, December 23, 2014 10:37 AM > > To: ADSM-L@VM.MARIST.EDU > > Subject: Re: [ADSM-L] checkin libv command > > > > Below is the command I use on my virtual L180 libraries which are SCSI > > libraries. > > I think the difference is the volume range. > > > > I do not know the library you have, but some libraries are partitioned > > and you have to make sure the tapes are assigned to the correct > partition. > > > > label libv vlibTSM_4 checkin=scr labelsource=barcode > > volr=s40000,s49999 search=y > > > > Andy Huebner > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf > > Of Jeanne Bruno > > Sent: Tuesday, December 23, 2014 8:39 AM > > To: ADSM-L@VM.MARIST.EDU > > Subject: [ADSM-L] checkin libv command > > > > Hello. We are using TSM manager 6.3.3.0. > > Tape Library is a DS3512. > > I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). > > On the DS3512, I choos the library and insert the tape into the machine. > > On the command line I use this command: > > > > label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y > > > > My output is this: > > > > ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx > > search=yes checkin=scratch labels=b overwrite=y ANR0984I Process 120 > > for LABEL LIBVOLUME started in the BACKGROUND at 09:29:14. > > ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as > > process 120. > > ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0 > > volume(s) labeled, 0 volume(s) checked-in. > > ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND > > completed with completion state SUCCESS at 09:29:19. > > > > 0 volumes, but finished successfully and when I query the library > > XXXXXX, the new tape does not show in the list. > > > > I have also tried this command: > > CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch > > WAITTIME=0 VOLLIST=A00xxxxL5. > > Results are the same. > > > > I have also tried putting the tapes on the door of the machine and not > > doing the 'insert media'...again results on the same. > > We just received 30 new tapes last week and I've tried about 10 of > > them so far. > > I have used the cleaning tape and did the clean process and also > > rebooted the DS3512.....same results afterwards. > > > > Any help, suggestions would be greatly appreciated. > > > > > > > > ____________________ > > Jeannie Bruno > > Senior Systems Analyst > > jbr...@cenhud.com<mailto:jbr...@cenhud.com> > > Central Hudson Gas & Electric > > (845) 486-5780 > > >