so, i'm 99% sure we use a netonix to power ours and they're 24 v
----- Original Message -----
From: Josh Luthman
To: Josh Baird
Cc: af@af.afmug.com
Sent: Thursday, June 21, 2018 11:39 AM
Subject: Re: [AFMUG] ePMP voltages again - specifically 2ghz
Except for every single Ubnt device and a majority of Mikrotiks....
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Jun 21, 2018 at 12:39 PM, Josh Baird <joshba...@gmail.com> wrote:
I promise life will be easier if you just use 48V. :)
On Thu, Jun 21, 2018 at 12:35 PM, Josh Luthman
<j...@imaginenetworksllc.com> wrote:
I'm trying to use a Powerbox Pro to power up two epmp APs. The 5 GHz is
just fine but the 2 GHz is saying current too low. Both ports are getting 23
volts and the cables are <10 feet (from the Powerbox Pro).
Does anyone know if the 2ghz requires more voltage possibly?
Spec sheet does say 23 volts min but it's weird one powers (5 ghz) and
the other doesn't.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
