It will kick client off the AP you need to use the old 5.5 firmware On Wed, Jun 27, 2018, 12:58 PM Sam Morris <w...@csilogan.com> wrote:
> What's up with the 900 Mhz and latest firmware? > > On 06/21/2018 11:01 PM, Timothy Steele wrote: > > Sounds like interference issue latest firmware is very solid unless your > > running 900mhz > > > > On Thu, Jun 21, 2018, 5:22 PM Jason McKemie > > <j.mcke...@veloxinetbroadband.com > > <mailto:j.mcke...@veloxinetbroadband.com>> wrote: > > > > I'm having a bit of a head-scratcher here. I've got a Ubiquiti > > Nanostation that I'm using as an AP for a small repeater site. All > > of the CPE's attached to it dropped in TX signal strength by about > > 15-20db. I tried switching the Nanostation out thinking maybe it > > was going deaf, but the problem persisted. Then I tried switching > > to the opposite end of the band (was at the low end). Problem went > > away. Is there something I'm not aware of from a regulatory > > standpoint that has been added in newer firmware or is this a bug? > > It didn't seem to have nearly as much of an effect on the AP's TX, > > so I'm leaning towards a bug. > > > > -Jason > > -- > > AF mailing list > > AF@af.afmug.com <mailto:AF@af.afmug.com> > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
