The printers aren't the problem, it's the CAD software. Ban that. Wait...
but without computers,
CAD software can't run. Ban computers! We'll fix this mess right up.

On Sat, Aug 11, 2018 at 12:25 PM, <ch...@wbmfg.com> wrote:

> ban 3d printers
> they make defective guns
>
> *From:* justsumname
> *Sent:* Friday, August 10, 2018 10:31 PM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] OT 3d printing and guns
>
> yep be careful:
>
> https://www.breitbart.com/big-government/2018/08/10/watch-
> man-tests-democrats-claims-pulls-trigger-on-all-plastic-gun-it-blows-up/
>
>
> On Thu, Aug 2, 2018 at 11:05 AM, <ch...@wbmfg.com> wrote:
>
>> No, we restrict SMTP transmission to only stateside IPs....
>>
>> *From:* can...@believewireless.net
>> *Sent:* Thursday, August 2, 2018 8:58 AM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] OT 3d printing and guns
>>
>> Chuck, I hope this list isn't international... expect a knock on your
>> door from the FBI from what you just published.
>>
>> On Thu, Aug 2, 2018 at 10:29 AM, <ch...@wbmfg.com> wrote:
>>
>>> But you don’t need a 3D printer.
>>>
>>> When I was a kid:  I put a shotgun shell in a vise, held a nail with
>>> pliers and used the nail and a ball peen hammer to set it off.
>>>
>>> I put shotgun shells in pipes and did similar things.
>>>
>>> As young as 5 years old I crammed a 22 cal cartridge into the holes in a
>>> chunk of lava rock and hammered it with another rock until it went off.
>>>
>>> As previously mentioned here, zip guns have been made for decades.  I
>>> recently crammed a 22 cal into a soda straw and threw it up in the air to
>>> come down on concrete.  It did not go off as promised.
>>>
>>> Tape a ball bearing or marble on the bottom of a shotgun shell and do
>>> the same thing.
>>> Lots of fun to be had without a 3D printer.
>>>
>>> *From:* Steve Jones
>>> *Sent:* Wednesday, August 1, 2018 9:53 PM
>>> *To:* AnimalFarm Microwave Users Group
>>> *Subject:* Re: [AFMUG] OT 3d printing and guns
>>>
>>> My biggest real concern about this is idiots, particularly young idiots,
>>> like most of us on this list probably were. Printing up the gun on a cheap
>>> printer and blowing their hands off because they don't understand the
>>> plastic quality matters. Granted, dumb kids like us blew things up with
>>> other stuff and manages to keep most of our fingers and a percentage of our
>>> hearing. Maybe I'm just getting old and worry about the consequences of
>>> dumb kids.
>>>
>>> And what happens to some kid who loads the file into one of the school
>>> printers, his life is effectively over for being a dumb kid.
>>>
>>> I find the hype humorous since you could download anarchist cookbook
>>> from almost day one of the public interwebs. Meth recipes and instruction,
>>> ricin production from castor beans, this krocodile fake heroin, napalm
>>> recipes, etc.
>>>
>>> On Wed, Aug 1, 2018, 8:57 PM Seth Mattinen <se...@rollernet.us> wrote:
>>>
>>>> On 8/1/18 6:48 PM, Jay Weekley wrote:
>>>> > Yep. There is a reason guns essential parts are made of metal instead
>>>> of
>>>> > plastic. They will still shoot metal bullets.
>>>>
>>>>
>>>> Print some plastic ones. Problem solved.
>>>>
>>>> --
>>>> AF mailing list
>>>> AF@af.afmug.com
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>> ------------------------------
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>>
>> ------------------------------
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>>
>
> ------------------------------
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to