There is a guy with a you tube channel that does crazy stuff like wooden
cylinder heads on lawn mower engines.
He should make an all wooden gun.
Use just the normal tools found in a high school wood shop.
Publish those plans.
(If you used ironwood for the barrel it might work. )
Then, what are they going to ban? High school wood shops?
Purchase of wood.
All plans for things made of wood.
*From:* can...@believewireless.net
*Sent:* Saturday, August 11, 2018 10:36 AM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT 3d printing and guns
The printers aren't the problem, it's the CAD software. Ban that.
Wait... but without computers,
CAD software can't run. Ban computers! We'll fix this mess right up.
On Sat, Aug 11, 2018 at 12:25 PM, <ch...@wbmfg.com> wrote:
ban 3d printers
they make defective guns
*From:* justsumname
*Sent:* Friday, August 10, 2018 10:31 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT 3d printing and guns
yep be careful:
https://www.breitbart.com/big-government/2018/08/10/watch-man-tests-democrats-claims-pulls-trigger-on-all-plastic-gun-it-blows-up/
<https://www.breitbart.com/big-government/2018/08/10/watch-man-tests-democrats-claims-pulls-trigger-on-all-plastic-gun-it-blows-up/>
On Thu, Aug 2, 2018 at 11:05 AM, <ch...@wbmfg.com> wrote:
No, we restrict SMTP transmission to only stateside IPs....
*From:* can...@believewireless.net
*Sent:* Thursday, August 2, 2018 8:58 AM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT 3d printing and guns
Chuck, I hope this list isn't international... expect a knock on
your door from the FBI from what you just published.
On Thu, Aug 2, 2018 at 10:29 AM, <ch...@wbmfg.com> wrote:
But you don’t need a 3D printer.
When I was a kid: I put a shotgun shell in a vise, held a
nail with pliers and used the nail and a ball peen hammer to
set it off.
I put shotgun shells in pipes and did similar things.
As young as 5 years old I crammed a 22 cal cartridge into
the holes in a chunk of lava rock and hammered it with
another rock until it went off.
As previously mentioned here, zip guns have been made for
decades. I recently crammed a 22 cal into a soda straw and
threw it up in the air to come down on concrete. It did not
go off as promised.
Tape a ball bearing or marble on the bottom of a shotgun
shell and do the same thing.
Lots of fun to be had without a 3D printer.
*From:* Steve Jones
*Sent:* Wednesday, August 1, 2018 9:53 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT 3d printing and guns
My biggest real concern about this is idiots, particularly
young idiots, like most of us on this list probably were.
Printing up the gun on a cheap printer and blowing their
hands off because they don't understand the plastic quality
matters. Granted, dumb kids like us blew things up with
other stuff and manages to keep most of our fingers and a
percentage of our hearing. Maybe I'm just getting old and
worry about the consequences of dumb kids.
And what happens to some kid who loads the file into one of
the school printers, his life is effectively over for being
a dumb kid.
I find the hype humorous since you could download anarchist
cookbook from almost day one of the public interwebs. Meth
recipes and instruction, ricin production from castor beans,
this krocodile fake heroin, napalm recipes, etc.
On Wed, Aug 1, 2018, 8:57 PM Seth Mattinen
<se...@rollernet.us> wrote:
On 8/1/18 6:48 PM, Jay Weekley wrote:
> Yep. There is a reason guns essential parts are made
of metal instead of
> plastic. They will still shoot metal bullets.
Print some plastic ones. Problem solved.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
