Looks like firmware 3.0 came out yesterday: [image: unnamed.jpg] On Wed, Aug 29, 2018 at 11:46 AM Colin Stanners <cstann...@gmail.com> wrote:
> We've been investigating Ufiber as an option for our fiber GPON > deployments. Hardware seems good, firmware has a long ways to go - from > what we've seen, the CPEs don't have WAN-accessible IPs (except for the in > the undesirable NAT mode) nor support SNMP management yet, so we have to > consider them unmonitorable. The fact that headend IP access doesn't work > but the CPEs by default have customer-side IPs that are reachable, which is > the opposite of what a provider wants, is strange. Ubnt's suggestion to > monitor the OLTs directly would have people logged into them 24/7 to watch > these devices, which doesn't work, nor to use UNMS as we already have far > more extensive systems installed and built into company accounting/change > tracking processes (and supporting many other Cambium wireless and other > fiber platforms). But there was a post from an Ubnt employee a few days ago > on here that some of these fixes, especially SNMP, are on track for > firmware 3.1. > > On Wed, Aug 29, 2018 at 12:18 PM Jason McKemie < > j.mcke...@veloxinetbroadband.com> wrote: > >> Does anyone actually have this equipment in a production environment? I >> have a test setup, just haven't heard much discussion about it so I thought >> I'd check with the group. >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com