Oh my. What's the address?
On 9/30/2018 1:03 PM, Craig House wrote:
Adam the problem here is not that we don’t use the markers because we do the
problem is that this campground allows drunken night time ATV riding without
helmets. Apparently would be a great place for some video cameras to if I
wanted footage for girls gone wild or rednecks gone wild
Sent from my iPhone
On Sep 30, 2018, at 11:55, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
Back in the olden days, I dug telephone pole holes up to 7 feet deep with
very long handled shovels, spoons and a long digging bar.
Then we would manually install the pole in the hole with pike poles.
Don't miss that!
-----Original Message-----
From: Adam Moffett
Sent: Sunday, September 30, 2018 10:49 AM
To: af@af.afmug.com
Subject: Re: [AFMUG] Anchor holes
Yeah, what Mitch said. They make yellow guards for guy wires;
specifically so people can see them and not get clotheslined.
It would also seem if somebody could hit the wire, they could hit your
pipe. Rather than getting clotheslined they've wrecked their ATV and
face planted into a pole. Making it more visible would be the key. If
the guy wire would physically cross an ATV trail, then moving the guy
anchors farther out would give it more clearance.
But I know I'm safely in my armchair here and can't see the situation on
the ground.
Telephone pole contractors can auger that deep. We had a guy doing 30"
holes 10 feet deep for so we could plant an 80' pole. If you want to
hit 6 feet depth, they might have something at the tool rental place for
setting deck posts. If not, then a telephone pole contractor. They can
go through rock if they have carbide rock teeth on the auger.
-Adam
On 9/29/2018 7:08 PM, Mitch Koep wrote:
Craig
Maybe a chain link fence next to the guy wires
to the ground connection Extend fence out to the the point the guy wires
is about
10 foot above ground???
We do that and use light weight orange fiber duct on the guy wires to the
ground lug
Mitch
On 9/29/2018 3:15 PM, Craig House wrote:
Yes. Elevated guy supports. The location is an atv off road ranch and
they are worried about people getting clothes lined.
Sent from my iPhone
On Sep 29, 2018, at 15:05, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
10 foot tall wooden poles for an aerial attachment only need to be set
maybe
4 feet deep.
Or are you talking about elevated supports for guy wires?
If so, you probably need to dig a trench for an L shaped sleeper and the
some rebar in sonotube for the poles and anchors.
-----Original Message-----
From: Craig House
Sent: Saturday, September 29, 2018 12:55 PM
To: af@af.afmug.com
Subject: [AFMUG] Anchor holes
I have a tower construction location which is going to require 10 foot
poles
above ground as an attachment point for the wires at each of the holes.
I
have the pipes constructed but I’m concerned about being able to drill
the
holes in our soil and ground to accommodate the pipes. Has anyone done
something like this before I’m not looking to do typical anchor holes
that
are 6 feet or 8 feet wide and a foot and a half across I’m looking for
an
auger hole that is a straight 6 to 7 feet down
Sent from my iPhone
Sent from my iPhone
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
