Nate,
 Sorry wasnt paying attention to this thread.
 +1 for Josh.. Just call and tell brian what you need and he can fix you up. They used to keep SM in stock but I think their supplier was running short so I had to do MM also but no big deal.
 Be sure and have handy all the details of what your looking for IE
Type of cable:Hybrid 1,2,3 pair fiber with 1,2 pair 12gauge copper stranded
termination type -LC,SC,ST
Length
Length of break out at each end

Dave


On 10/03/2018 10:41 AM, Josh Baird wrote:
We currently use a CommScope hybrid cable from Best-tronics, but it’s MM and I’m looking for something SM.  Just call and speak to Brian.

On Oct 3, 2018, at 8:12 AM, Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote:

Apparently it's been a long time since I was last at the best-tronics website.  Didn't they used to have an online catalog?  I'm also interested in learning about the hybrid cable you are using.

On 10/2/2018 3:08 PM, Josh Baird wrote:
Would you mind giving me the specs/part# of the cable that you got from Bestronics?

On Tue, Oct 2, 2018 at 11:53 AM Dave <dmilho...@wletc.com> wrote:

    We are installing our ptp820c's in a week.
    I ordered the bestronics hybrid armored cable for my deployment.
    I had to make one change to the install to accommodate the DC wire.
    I used a small sched80 box to install a transtector DC line
    protector and ran the leads from it to the radio for direct dc
    connection.
     Transtector part # 1101-626  cost is around $189 ea
    We use then anytime we have a direct run both top and bottom of
    the run.
     The scedule 80 box allows for some room for extra wire or a
    second pair of fiber.
    I will have to do something to harden the outside of the fiber
    pair to the radio but I think I have an idea.



    On 10/02/2018 09:52 AM, Nate Burke wrote:
    I've only briefly physically seen an 802C radio.  When running
    fiber to the SFP Port, is there space inside the radio to store
    slack Fiber, or do you have to have the outdoor jacket continue
    to within an inch of the connectors like on the old PTP600 radios?

    Looking at the Cambium fiber cables, EG, N000082L140A - PTP820
    Optical Cable, SM, 50M  What kind of cable are they actually? 
    Like a real, well terminated, armored cable, with pulling eyes
    that will survive tower installs, or the UBNT Fiber cable,
    where there is no furcation tubing, strain reliefs, armor, or
    Pulling eye, and the jacket is made out of sticky tar.


-- -- AF mailing list
    AF@af.afmug.com <mailto:AF@af.afmug.com>
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com




--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to