I don’t know about J series, but their Micropack series is -48V. I seem to remember because of the control circuitry.
From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com Sent: Monday, November 26, 2018 4:56 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Eltek Valere J series -48 or +48 It is 48. Period. You choose the reference if you want one. If you tie the + terminal to chassis ground then the – terminal is the hot –48 VDC terminal. If you tie the – terminal to chassis ground then the + terminal is the hot +48 VDC terminal. If you don’t tie either to chassis ground, then you will have to have a common return bar that is on the opposite rail from your fuses and circuit breakers. From: TJ Trout Sent: Monday, November 26, 2018 3:40 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Eltek Valere J series -48 or +48 I'm looking at the Valere series and I can't seem determine if it's +48 or -48, seems like it's +48 but I thought all the telecom stuff was positive ground. How do you go about powering negative ground loads from a positive ground power source? I'm assuming you can leave out the neutral and isolate the chassis? _____ -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
