I do the same unless there is a larger load on 24vdc.
On 5/1/19 12:01 PM, Joe Novak wrote:
For you guys that are utilizing these, do you normally do a 48V and a
24V volt power supply for mixed sites? Or do you do what I think I saw
Ken mentioned before - 48 to 24V converter for the few devices that
may require 24v?
On Tue, Apr 16, 2019 at 10:21 AM Sam Lambie <samtaos...@gmail.com
<mailto:samtaos...@gmail.com>> wrote:
I have been using both of those same models with PF gear for a
long time. never had an issue with them.
On Tue, Apr 9, 2019 at 2:51 PM Brandon Yuchasz
<li...@gogebicrange.net <mailto:li...@gogebicrange.net>> wrote:
Last night I replaced yet another Amazon special 29.5V power
supply that was feeding out packetflux equipment. These are
defiantly a weak link and something I need to pull out of the
field and replace.
I spent some time today digging into the MeanWell product line
and came up with two options to power our original Packetflux
sites along with the ones now running the rack injectors.
I need but 28V DC and 48V DC at sites feed from 120VAC
I am considering going with the Mean Well NDR 120-24 and Mean
Well NDR 120-48 units. Does anyone have experience with these
good or bad? Just looking for something that more stable and
reliable at this point.
Thanks,
Brandon
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
