Yeah, that might be right. Really just need to make sure it's going to survive the winter/summer cycles, both ends will be protected.
Not sure where to get 1m or 2m patch cables like these then unless I do order custom? Seems like some vendor should have something like this in stock. From: AF <af-boun...@af.afmug.com> On Behalf Of Nate Burke Sent: Thursday, June 20, 2019 4:09 PM To: af@af.afmug.com Subject: Re: [AFMUG] Looking for unusual splice case I don't think the #40384 is an actual outdoor cable. I was asking FS For outdoor cables, and they said that only the custom length indoor/outdoor cables are outdoor rated. On 6/20/2019 4:48 PM, Sterling Jacobson wrote: Actually I think I'll just use these items from FS.com Splice case for DFP-1246 #35858 LC duplex #76105 Cabinet side splice case for DFP-1246 #18013 1m Outdoor LC to LC SMF outdoor cable #40384 That should get me the splice case for outdoor/roof/tower and inside/cabinet with LC if I just cut and splice some LC SMF patch cords lying around. And just lose patch shielded RJ45 male to female. The screw terminals might work for DC positive and negative distribution on the outdoor case, right? From: AF <af-boun...@af.afmug.com><mailto:af-boun...@af.afmug.com> On Behalf Of Sterling Jacobson Sent: Thursday, June 20, 2019 2:40 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com><mailto:af@af.afmug.com> Subject: [AFMUG] Looking for unusual splice case Continuing with my 'new' model POP/Tower distro. I need an unusual splice case or solution to tower/roof terminate Shireen SFP-1246 that has 4 C SMF fiber, 2 C 12 AWG and shielded Cat6 Ethernet. It would be best if I could mount it to a J arm, feed in the Shireen, and be able to pull out up to three separate DC feeds, one or two LC patch cables and a shielded Cat6 patch.
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com