Too bad they did not reuse the glands they used on other products that were 
large enough.  

From: Ken Hohhof 
Sent: Wednesday, September 25, 2019 2:12 PM
To: 'AnimalFarm Microwave Users Group' 
Subject: Re: [AFMUG] [ External ] Re: CnPulse sad

Matt, I think I just discovered another problem – do the glands really require 
that you crimp the RJ45 plug on the cable AFTER passing it through the gland?  
Ideally a shielded plug.

 

That’s more than inconvenient, I’m going to have to order something else.

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Mangriotis via AF
Sent: Wednesday, September 25, 2019 2:46 PM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Cc: Matt Mangriotis <matt.mangrio...@cambiumnetworks.com>
Subject: Re: [AFMUG] [ External ] Re: CnPulse sad

 

Just want to say THANK YOU for the feedback. I love reading this list every day…

 

Matt

 

From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com
Sent: Wednesday, September 25, 2019 2:44 PM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: [ External ] Re: [AFMUG] CnPulse sad

 

Yes, with universities having “cry closets” for our snowflake generation to use 
during finals, what would one expect.  

 

BTW, AFMUG is not a “safe space”, we do our best to “trigger” snowflakes and it 
could be best said that we are a “brave space”.

 

From: Nate Burke 

Sent: Wednesday, September 25, 2019 1:37 PM

To: AnimalFarm Microwave Users Group 

Subject: Re: [AFMUG] CnPulse sad

 

I'm sure they stopped doing that because all the sensitive engineers who are 
just out of college now can't handle being told that their ideas are bad.  

I think the last time they had an event which was similar was when the original 
god-awful EPMP 1000 dishes had just come out.  The meeting was in January, we 
had one with and tried to get the engineers to come out and assemble it on the 
tailgate in the parking lot with us.  They refused.  

On 9/25/2019 2:34 PM, ch...@wbmfg.com wrote:

  Way back in the day, Motorola would send some of us prototypes to test and 
give feedback on before they finalized the designs.

  They used to also have groups of users voice opinions about the roadmap.

   

  From: Eric Muehleisen 

  Sent: Wednesday, September 25, 2019 1:28 PM

  To: AnimalFarm Microwave Users Group 

  Subject: Re: [AFMUG] CnPulse sad

   

  I had the same head scratching moment with the uGPS before it was called the 
cnPulse. The design is awkward to say the least. It didn't have any idiot 
lights which was difficult for the tower crew to troubleshoot. We quickly 
removed it and went to a RackIjector. Best decision ever.

   

  On Wed, Sep 25, 2019 at 2:11 PM Ken Hohhof <af...@kwisp.com> wrote:

    We’ve always used PacketFlux sync products with Cambium radios, I have a 
somewhat unusual install involving a 450i and an omni and wanted AUX port sync 
and decided to try a CnPulse instead of ordering a Syncbox Jr. AUX port version.

     

    Am I wrong, or did the Cambium team responsible for this product royally 
mess up?

     

    1)  Big multilanguage instruction sheet, nowhere shows how to assemble or 
install the product.

     

    2)  Instruction sheet has generic photo of Cambium radios installed at a 
tower but does not show a CnPulse.

     

    3)  Bracket is stupid and for some reason they decided the cable glands 
should come out horizontally not at the bottom.

     

    4)  Screws for attaching bracket (or flipping it around to mount on the 
opposite side of the pipe) require a T15 bit, because every tower climber 
carriers Torx bits.

     

    5)  Label for which port is which is on the back where the bracket 
attaches.  Yes there are also labels molded into the plastic housing, but the 
grey on grey is almost invisible.

     

    The bracket is so stupid it’s tempting to just electrical tape the unit to 
the pipe.  Except if we pointed the cable glands down, would it still see the 
satellites?

    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com


------------------------------------------------------------------------------

  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com

   

 


--------------------------------------------------------------------------------

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--------------------------------------------------------------------------------
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to