I've had 2011's out in the field, and a couple CRS's deployed. No
problems.
On 10/18/2019 9:53 AM, Steve Jones wrote:
no, out on the sites. grain dust, poor temp control, moderately harsh
environment
On Fri, Oct 18, 2019 at 9:52 AM Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
Are you talking about just as like an office switch? I've had a
CRS doing my home network for a couple years without an issue. I
also have a couple scattered around the server room as switches
connecting servers. I haven't touched them since I put them in.
On 10/18/2019 9:39 AM, Steve Jones wrote:
We usually use the lower end HP procurve switches, we have had
zero problems with them over the years, but now theyre office
connect and seem that all the 24 port ones are going deep instead
of 10 inches.
The CRS stuff is 1/2 to 1/3 the cost of comparable HP switches.
Have any of you degenerates used these very much and stayed with
them? We route with mikrotiks so we are aware of the mikrotik
funky stuff, the cost offsets those
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
