everything has to be one or the other. no way to sync 2.5 and 5 together. going to 5ms you should see about 10% boost in performance
On Tue, Aug 18, 2020 at 9:44 AM Sam Lambie <samtaos...@gmail.com> wrote: > I am replacing some 450 AP's with 450i so I can utilize 40mhz channels and > a little better throughput. Currently All my 450m AP and 450 and 450i Ap's > are synced to 15 miles, 75% and 6 contention slots. Everything is happily > humming along with these settings. Easy enough to duplicate at 40mhz And > call it good. But I like to try to squeeze as much throughput as I can out > my network. > With the replacement, I am curious if I were to go to 5 ms frames on the > AP's, how the heck do I sync the settings? It seems impossible as the start > and end Slots have basically doubled when going to 5.0 ms frames. > I have within earshot of this site about 10- 450m AP's spread out over > 15-20 miles. They don't do 5.0 ms, so I am wondering if I am going down a > rabbit hole... > Has anyone colocated AP's with mixed frames? Does it work? I also have 2 > ePMP 2000 AP's at this site as well to add to the fun... > > Thanks > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
