I have been using the FS 1g/10g industrial spec SFPs in the Midwest for a couple years. No problems at all. Edgepoints up on grain legs, and Mikrotiks in outdoor boxes.

On 10/15/2020 2:12 PM, Adam Moffett wrote:

Interesting.  The JDSU industrial temp SFP's are like $200+

Makes me wonder if one of them is robbing me or is the other one bullshitting me.


On 10/15/2020 3:07 PM, Ken Hohhof wrote:

FS sells a bazillion different SFPs. What is the spec temp range on the ones you got?

Someone else pointed me to these:

https://www.fs.com/products/12622.html

-30 is pretty cold, not sure if that’s F or C. Of course at -40 they’re the same. You’d expect if you have them plugged into a switch there would be some heating and the SFP wouldn’t be as cold as the outdoor temp.

*From:* AF <af-boun...@af.afmug.com> *On Behalf Of *ch...@wbmfg.com
*Sent:* Thursday, October 15, 2020 12:49 PM
*To:* af@af.afmug.com
*Subject:* Re: [AFMUG] Cold-weather Ethernet isolation (electrical / ground)

When I was designing for Carlson, we discovered cold is always the enemy, not heat.

*From:*Bill Prince

*Sent:*Thursday, October 15, 2020 11:45 AM

*To:*af@af.afmug.com <mailto:af@af.afmug.com>

*Subject:*Re: [AFMUG] Cold-weather Ethernet isolation (electrical / ground)

Run fiber. Goes farther, does not conduct.

bp
<part15sbs{at}gmail{dot}com>

On 10/15/2020 10:12 AM, Colin Stanners wrote:

    We have a rural tower site where the owner has a few houses on
    the property, they ran conduit and cat5e between the houses and
    the tower so the houses could get Internet access.

    But.... with the size of the property and the tower being a big
    metal structure, that caused some voltage / ground imbalances
    that fried gear at the houses after storms, I believe even
    through surge supressors (hich are made to protect against single
    high-voltage direct strikes).

    We put in some electrical isolation using copper-fiber-copper
    converters / switches at the tower, those worked until the
    winter: when it got to -30 outside the FiberStore SFPs were unhappy.

    Does anyone have good cold-weather solutions? Or were we just
    unlucky with those SFPs and should try something else in the cold?



------------------------------------------------------------------------

--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to