For the 100AH ones we just put them on a battery shelf mounted at the bottom of our telco rack. For the 60AH ones we put them in a separate battery enclosure in the cabinet.
On Wed, Feb 3, 2021 at 3:00 PM Josh Baird <joshba...@gmail.com> wrote: > No, they go in dedicated battery enclosures and/or sit on mats in larger > buildings. > > On Wed, Feb 3, 2021 at 3:53 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> Specifically for ICT, you need to adjust the LVD to be higher than the >> BMS's cut off. If you let it drop with the BMS, it's 0v and then the >> battery is basically gone until you reset it (like drive out there and >> physically push a button). Float voltage I'm told you need to change, too. >> >> Looking at the NSB100FT RED, these are nearly a foot tall. Are you >> mounting them in the rack? That's 7U of space, which I suppose isn't >> massive (I was previously looking at lithium ion before learning about the >> complications, that was 6U). >> >> Josh Luthman >> 24/7 Help Desk: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> On Wed, Feb 3, 2021 at 3:01 PM Chuck McCown via AF <af@af.afmug.com> >> wrote: >> >>> I presume if the float voltages are the same you could. But not if they >>> are different. >>> >>> *From:* SmarterBroadband >>> *Sent:* Wednesday, February 3, 2021 11:52 AM >>> *To:* 'AnimalFarm Microwave Users Group' >>> *Subject:* Re: [AFMUG] Battery recommendations at fiber hut >>> >>> >>> Can you connect batteries like this, with built in BMS, directly into a >>> system like ICT made for SLA/AGM? >>> >>> Adam >>> >>> >>> >>> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Louis >>> Arsenault >>> *Sent:* Wednesday, February 3, 2021 4:48 AM >>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>> *Subject:* Re: [AFMUG] Battery recommendations at fiber hut >>> >>> >>> >>> We have been using PowerTec Solutions >>> >>> >>> https://www.powertecsolutions.net/solutions/#psi-micro-vision-48v-rackmount-battery-series >>> >>> We have 4 of them setup in the fiber hut. >>> >>> They have a BMS to protect the batteries from overcharging / >>> overcurrenting >>> >>> >>> >>> On Tue, Feb 2, 2021 at 3:33 PM Josh Luthman <j...@imaginenetworksllc.com> >>> wrote: >>> >>> I'm looking at a 1200 watt load and would like to see 2 or 3 hours of >>> run time. Everything's 48vdc. >>> >>> >>> >>> I'm kind of leary about using lithium ion since I'm using an ICT power >>> supply and their system is designed for SLA/AGM. >>> >>> >>> >>> What kind of things should I be looking for? I thought these looked >>> pretty good: >>> >>> >>> https://www.batteriesplus.com/productdetails/battery/sla-sealed-lead-acid/12/wkdc12=80pus >>> >>> >>> >>> 12v*80a=960whr >>> >>> 4 of these = 3840whr >>> >>> Runtime upwards of 3.2 hours (obviously there will be loss, but >>> shouldn't I expect 2+ hours)? >>> >>> >>> >>> Josh Luthman >>> 24/7 Help Desk: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com