None of the dishes are interchangeable. I'd guess the radomes aren't interchangeable, but I could certainly be wrong.
I think if you're looking for heavy loaded sites you'd be better off with a connectorized model and 2' parabolic+ Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Feb 4, 2021 at 12:12 PM Brandon Yuchasz <li...@gogebicrange.net> wrote: > Josh, > > Is the dish the old force 200 and force 300 dish still on that 425? > Wondering if the Radomes still fit on this new model? > > Thanks, > > Brandon > > > > > > *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Josh Luthman > *Sent:* Wednesday, February 03, 2021 2:23 PM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Cambium's new 802.11ax ePMP PTP solution, the ePMP > Force 400 Series -- 1GBps PTP > > > > Me Josh? > > > > I've got a PTP Force425 up between a 4 story building and a tiny little > Rohn SSV about 4 miles away. It was a Force 200-25. Signal is great, only > noise is us, etc. We get 12.5 b/hz. So 20 MHz is 250 mbps. I can ramp > that up to 500 mbps for 40 MHz and, while I haven't tried it, upwards of > 1gbps in 80 MHz. > > > > Hardware is wonderful, we get the perfected Force 200 hardware back. The > only complaint I have is we're switching to 48v. So far an AC site it's > just a minor inconvenience but for a DC without a 48v bus you're going to > need a solution. > > > > It's a great product. It's Cambium. Not sure what else there is to say - > buy them, hang them, move on to the next install. > > > > Josh Luthman > 24/7 Help Desk: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > > > On Wed, Feb 3, 2021 at 10:19 AM Lincs_Chel <lhan...@enc-tech.com> wrote: > > Hi Josh; > > I am not sure if it is you that Cambium was referring to in their > Webinar introducing the new ePMP Force 400 series PTP, but if it is, can > you speak about the performance and any other experiences with > reference in regards to this. > > Or if anyone else have experiences so far with this new series. > > Thanks, > > > Lincs > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com