AHHH yess your conversion to the Dark side is now complete MUHAHAHA!
On 2/4/21 3:26 PM, Josh Luthman wrote:
None of the dishes are interchangeable. I'd guess the radomes aren't
interchangeable, but I could certainly be wrong.
I think if you're looking for heavy loaded sites you'd be better off
with a connectorized model and 2' parabolic+
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Feb 4, 2021 at 12:12 PM Brandon Yuchasz
<li...@gogebicrange.net <mailto:li...@gogebicrange.net>> wrote:
Josh,
Is the dish the old force 200 and force 300 dish still on that
425? Wondering if the Radomes still fit on this new model?
Thanks,
Brandon
*From:*AF [mailto:af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>] *On Behalf Of *Josh Luthman
*Sent:* Wednesday, February 03, 2021 2:23 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] Cambium's new 802.11ax ePMP PTP solution,
the ePMP Force 400 Series -- 1GBps PTP
Me Josh?
I've got a PTP Force425 up between a 4 story building and a tiny
little Rohn SSV about 4 miles away. It was a Force 200-25. Signal
is great, only noise is us, etc. We get 12.5 b/hz. So 20 MHz is
250 mbps. I can ramp that up to 500 mbps for 40 MHz and, while I
haven't tried it, upwards of 1gbps in 80 MHz.
Hardware is wonderful, we get the perfected Force 200 hardware
back. The only complaint I have is we're switching to 48v. So
far an AC site it's just a minor inconvenience but for a DC
without a 48v bus you're going to need a solution.
It's a great product. It's Cambium. Not sure what else there is
to say - buy them, hang them, move on to the next install.
Josh Luthman
24/7 Help Desk: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Feb 3, 2021 at 10:19 AM Lincs_Chel <lhan...@enc-tech.com
<mailto:lhan...@enc-tech.com>> wrote:
Hi Josh;
I am not sure if it is you that Cambium was referring to in their
Webinar introducing the new ePMP Force 400 series PTP, but if
it is, can
you speak about the performance and any other experiences with
reference in regards to this.
Or if anyone else have experiences so far with this new series.
Thanks,
Lincs
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com