The voltages on base 1/2 have always been off from our meters. I'm not sure about the base 3...
Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jun 4, 2021 at 4:58 PM Forrest Christian (List Account) < li...@packetflux.com> wrote: > The Base 3 gets calibrated before it leaves the shop. The base 2 isn't > calibrated at all and relies on the precision of the components in it. > > If this is a Base 3, it might need a recalibration, but we don't currently > have a way to do this in the field. Shoot us an email to > cust...@packetflux.com > > On the Base 2, it might end up being a damaged component. > > On Fri, Jun 4, 2021 at 12:42 PM Sam Lambie <samtaos...@gmail.com> wrote: > >> I monitor battery voltage on the 2nd power port of Site Monitors when >> power goes down, I can then take a look at the voltage and determine >> whether I need to lug out the genny or not. But, one particular site >> monitor reads 24.5 but my multi meter measures 25.1 at the same terminals. >> >> So far I don't see a way to edit the values. It won't take when I hit the >> pencil. >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > - Forrest > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
