Why not just replace the cable with the correct length? you can use the FS ftta or aviat cables, or epcom has them dirt cheap for duplex smf lc
On Wed, Mar 16, 2022 at 1:07 PM <dmmoff...@gmail.com> wrote: > I don’t know what that looks like. > > Coyote DTC includes grommets for the flat oval drop cable, but there are > optional grommets for round cable, but being intended for service drop > cable it has a pretty small maximum diameter. > > > > > https://preformed.com/images/pdfs/Communications/Fiber_Networks/Coyote_Fiber_Optic_Closures/Coyote_DTC/COYOTE_DTC_Pages_from_CO-CA-1004-16_Fiber_Optics_catalog-2.pdf > > > > Check the second page in that PDF and see if one of the optional grommet > kits will match the diameter of your cable. > > > > -Adam > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones > *Sent:* Wednesday, March 16, 2022 3:56 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] Small dual splice case > > > > this is the armored dual strand that Aviat sells with the WTM4200 > > > > On Wed, Mar 16, 2022 at 11:35 AM <dmmoff...@gmail.com> wrote: > > I forgot to ask if this was indoors. Every link you’ve seen so far is an > outdoor case. They will work indoors just the same, and the DTC I believe > has a couple of mounting holes to screw it to a wall. DTC also has a snap > on lid which you could pry off while reaching through the ladder. > > For indoor cases we usually get them from FIS. A billion options there, > but most of them have a swing open front door which will be an issue with a > ladder 3” in front of it. Might just as well stick with the Coyote DTC > with the pry off lid. > > > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones > *Sent:* Wednesday, March 16, 2022 12:11 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* [AFMUG] Small dual splice case > > > > I have some locations I need to extend our Aviat fiber. Im having trouble > finding a small splice case from legitimate vendors. I find weird chinese > ones, but I dont know the product would even ship. > > I just need to splice the two, one splice will sit behind a fixed ladder > so its only got like 3 inches clearance. > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
