Opengear On Thu, Jun 9, 2022 at 11:02 AM D. Bernardi <dberna...@zitomedia.net> wrote:
> > Hi, > > I'm looking for cost effective recommendations for out of band serial > console access (RJ11 RS-232, typically 9600 buad) to various pieces > of network gear (transport, MPLS/IP, CMTS/OLT). 200+ brick and mortar > buildings and pole mounted cabinets throughout the country so > nationwide access required. > > This would only be needed when a POP becomes isolated from in-band > management so bandwidth requirements are minimal as well as data plan > usage. Maybe pasting a very large config files but no firmware loads > or WWW access required. > > What method do you use across all carriers for on-demand access to > the remote console servers? Static IP address, VPN, triggered > call-home, private cloud, etc.? > > And is IOT type service (LTE-M) good enough or is standard LTE/4G required. > > Thanks in advance. > Dave B. > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- NOTICE OF CONFIDENTIALITY This communication, including any attachments, is intended only for the use of the addressee(s) to this email and is confidential. If you are not an intended recipient or acting on behalf of an intended recipient, any review, disclosure, conversion to hard copy, dissemination, reproduction or other use of any part of this communication is strictly prohibited. If you receive this communication in error or without authorization, please notify the originator immediately and remove it from your system.
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com