Do you have a fixed cost per kwh or is time of use or different cost per kwh based on what bucket your overall usage.
You have any other than fixed cost per kwh then just wire everything in the same leased spaces to its own meter. If that retail space ends up being food service do you really want to foot the bill for their power usage when they hit peak traffic during peak power rates like at lunch time. On Sat, Oct 1, 2022 at 2:10 PM Chuck McCown via AF <af@af.afmug.com> wrote: > Found by googling: > https://accucdn.accuenergy.com/wp-content/uploads/AcuRev-2100-Multi-Circuit-Submeter-Datasheet.pdf > > > > *From:* Chris Fabien > *Sent:* Saturday, October 1, 2022 11:41 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* [AFMUG] Datacenter power submetering > > We are remodeling our old office building into a datacenter with 2 or 3 > tenants and a 2500 sqft general retail space. I want to be able to > sub-meter the power on a per-circuit basis, and ideally be able to assign a > group of circuits to each tenant they serve. I have seen some inexpensive > solution using small current transformers in the panel but they are > targeted at residential. The circuits needing to be metered will be from 20 > to 200A feeds. Any solutions out there like this? > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) My website <http://zachunderwood.me> advance-networking.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
