7360 FX-4, FX-8, FX-16. I think you and I may have talked about it once before.
We've been on the ISAM software, but we're beginning to shift towards Altiplano. ________________________________ From: AF <[email protected]> on behalf of Mark Radabaugh <[email protected]> Sent: Monday, February 16, 2026 9:58 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] THHN in Wire loom Adam, Are you using Lightspan / FX / Altiplano? We have been running it for a while now. Mark On Feb 16, 2026, at 4:38 PM, Adam Moffett <[email protected]> wrote: Fiber. And I dug into it a bit more. The enclosure is actually made by Vertiv. Vertiv sells it with a load center, and they have a battery heater and GFCI outlet prewired. The items prewired by Vertiv have liquitite conduit going to them. An integrator working for Nokia would have installed the rectifier and did the wire loom thing. I'm not sure how well that squares with the "inside of an appliance" notion. Vertiv's instructions point an arrow at the same 3/4" knockout for AC input. I think we're just not supposed to have a 100A breaker. Nokia should talk to their integrator. -Adam
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
