The SXT antenna were always too weak. Give me 25 dBi or give me death. Well, 
okay, I don't feel that strongly. I just won't buy it if not. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

----- Original Message -----

From: "Stefan Englhardt via Af" <af@afmug.com> 
To: af@afmug.com 
Sent: Wednesday, September 24, 2014 8:30:07 AM 
Subject: Re: [AFMUG] rocket ac lite performance 



We’re starting the move to .ac with MT now. The 922UAGS-5HPacD has the same 
dimensions as 
the 911/411 Boards so we just replace boards. 

We get good results with Mars Antennas with housing for P2P. The SXT-Antennas 
are to weak for .ac. 
The 19db Mars Antennas give good CPE/short range PTP with a small footprint. We 
use these as 
Sector-Antennas where we have to cover small areas. 

The .ac firmware adaption is quite new but we see stable results in the 300-400 
Mbit/s range for short links. 
The .ac boards have faster CPUs so they may increase 11n-Speeds/NAT 
Performance. 
The 922-Board has a SFP. Ethernetport has moved. Due to this the RFElements 
Stationbox XL do not fit. 

MT .ac does PTP and PTMP and is downward compatible to older boards with 11n/a. 

SXTs with .ac are not stable with the latest sw-release. So as always with MT 
you’ve to betatest 
HW/FW-combination to get it running smooth. 






Von: Af [mailto:af-bounces+ste=genias....@afmug.com] Im Auftrag von Rory 
Conaway via Af 
Gesendet: Mittwoch, 24. September 2014 14:26 
An: af@afmug.com 
Betreff: Re: [AFMUG] rocket ac lite performance 

Yeeeeaaaaa, I don’t’ think so. If you use Ubiquiti you pretty much know what 
works and what doesn’t. in reality, you use as few custom features as possible 
outside 802.11 compatibility and limit the radios to Layer 2 bridges or nothing 
more than NAT whenever possible. Try not to use any of the customer features 
although AirMax seems to be working pretty well. You just don’t want to add 
anything that adds to processor overhead on an AP for Rocket M5’s if you have a 
higher density. When the Titanium’s tanked a couple years ago, there was a huge 
hole in any kind of AP product with the ability to handle density due to the 
processor but nobody filled it. It still hasn’t been filled to my satisfaction 
meaning we aren’t replacing Rocket 5M’s any time soon and we are keeping them 
at 50 users or less for another few months. However, NetFlix and video 
streaming means we are pushing that down to a planned 30 over the next couple 
of months. That numbers are just estimates but somewhere between 30-50 under 
heavy video streaming usage and AirMax will start causing issues. 

If you allow torrents or anything that opens up a massive number of 
connections, then the number of users per AP drops significantly which is why 
we run filtering on the back end to reduce that. I’ve seen APs with less than 
30 go apoplectic with a couple of wild torrent users. 

Rory 

From: Af [ mailto:af-bounces+rory=triadwireless....@afmug.com ] On Behalf Of 
That One Guy via Af 
Sent: Tuesday, September 23, 2014 11:47 PM 
To: af@afmug.com 
Subject: Re: [AFMUG] rocket ac lite performance 


:-) the ubntboys tend to not be all that informed they blindly swear by 
whatever the spec sheets and feature notices tell them 



On Wed, Sep 24, 2014 at 12:44 AM, Josh Reynolds via Af < af@afmug.com > wrote: 


For the first question, I have no idea, since the only released radios are PtP 
at this time. Pretty hard to tell. 

For the second one, "ubntboys" (at least the informed ones) don't run airsync, 
because they know it doesn't work well. :) 

Josh Reynolds, Chief Information Officer 
SPITwSPOTS, www.spitwspots.com 
On 09/23/2014 09:06 PM, That One Guy via Af wrote: 



does it work? or does it work in ubntboys eyes like airsync? 





On Tue, Sep 23, 2014 at 11:12 PM, Josh Reynolds via Af < af@afmug.com > wrote: 


For clarification for EVERYBODY reading this post, ALL AIRMAX AC PRODUCTS HAVE 
AIRMAX OFFLOADING :) 

Josh Reynolds, Chief Information Officer 
SPITwSPOTS, www.spitwspots.com 
On 09/23/2014 07:33 PM, Mathew Howard via Af wrote: 
<blockquote>



The ptp-lites do have airmax offloading? I thought they didn't... 

We've had a link running for awhile, but it's got some noise issues, so it 
hasn't really been the best place to test these... that said, they've been 
running fine without any real problems that I've noticed. 
� 




From: Af [ af-bounces+mathew=litewire....@afmug.com ] on behalf of Josh 
Reynolds via Af [ af@afmug.com ] 
Sent: Tuesday, September 23, 2014 9:49 PM 
To: af@afmug.com 
Subject: Re: [AFMUG] rocket ac lite performance 


ptp lites are missing the internal shielding (i think?) as well as airprism 
tech 

they do have airmax offloading, but it's also a brand new product line... some 
bugs are showing in the software 

Josh Reynolds, Chief Information Officer 
SPITwSPOTS, www.spitwspots.com 
On 09/23/2014 06:48 PM, That One Guy via Af wrote: 
<blockquote>


These are basically beta release hardware? its missing some guts? 



On Mon, Sep 22, 2014 at 9:04 PM, Rory Conaway via Af < af@afmug.com > wrote: 


I don�t have one but from what I�m reading, it�s not quite ready for 
primetime.� I�m waiting. 
� 
Rory 
� 

From: Af [mailto: af-bounces+rory = triadwireless....@afmug.com ] On Behalf Of 
TJ Trout via Af 
Sent: Monday, September 22, 2014 6:39 PM 
To: af@afmug.com 
Subject: [AFMUG] rocket ac lite performance 
� 

How are the rocket AC's performing for you guys? Throughput? Bugs? 





-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 



</blockquote>







-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 
</blockquote>







-- 

All parts should go together without forcing. You must remember that the parts 
you are reassembling were disassembled by you. Therefore, if you can't get them 
together again, there must be a reason. By all means, do not use a hammer. -- 
IBM maintenance manual, 1925 

Reply via email to