? There is A beta out that has that? I'm confused now— Sent from Mailbox On Tue, Sep 30, 2014 at 4:48 PM, George Skorup (Cyber Broadcasting) via Af <af@afmug.com> wrote:
> Build 30 has that. > On 9/30/2014 3:23 PM, Adam Moffett via Af wrote: >> An upcoming release is supposed to have a pre-populated list of >> channels, but you'll still be able to add the custom frequencies if >> you need/want to. >> >> I don't recall which version is supposed to have that. >> >> >>> Why do we have to enter custom frequencies for 365? >>> >>> Also 365 SM's seem to get stuck when doing a site survey it will link >>> at -75 then don't matter if you put the SM on ground signal won't >>> update until you do a capacity test >>> >>> Been liking the Mimo-A drop down support but it has a bug in it where >>> it will try and achieve higher modulation and then drop so there is >>> still more to do on your algorithm for that but have a very good start >>> — >>> Sent from Mailbox <https://www.dropbox.com/mailbox> >>> >>> >>> On Tue, Sep 30, 2014 at 3:11 PM, George Skorup (Cyber Broadcasting) >>> via Af <af@afmug.com <mailto:af@afmug.com>> wrote: >>> >>> You broke my GPS stats. The 450AP I updated does not read the >>> Motorola binary GPS data from the attached SyncPipe anymore. And >>> there are other bugs, maybe just GUI/display issues though. I >>> sent the info to Aaron, go beat him up for me. The GPS data issue >>> needs to be fixed before I can update any more sectors. >>> >>> Other than that, I'm impressed with the RF performance w/ MIMO-A. >>> It seems to have really helped with all the >>> multipath/fading/ducting and sessions dropping we've been seeing >>> at night. And throughput got a lot better in most cases. >>> >>> On 9/30/2014 1:49 PM, Jonathan Mandziara via Af wrote: >>>> >>>> Folks, >>>> >>>> � >>>> >>>> Does anyone have any 13.2 Beta feedback that they would like to >>>> share with the list? >>>> >>>> � >>>> >>>> Best, >>>> >>>> � >>>> >>>> Jonathan >>>> >>>> � >>>> >>>> *From:*Af >>>> [mailto:af-bounces+jonathan.mandziara=cambiumnetworks....@afmug.com] >>>> *On Behalf Of *Jonathan Mandziara via Af >>>> *Sent:* Thursday, September 25, 2014 9:32 AM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] New PMP beta load 13.2 Build 30 available! >>>> >>>> � >>>> >>>> Folks, >>>> >>>> � >>>> >>>> PMP Beta 13.2 Build 30 is also there for PMP430 and PTP230 >>>> devices.� Please download it and let us know what you think. >>>> >>>> � >>>> >>>> Best, >>>> >>>> � >>>> >>>> Jonathan >>>> >>>> � >>>> >>>> *From:*Af >>>> [mailto:af-bounces+jonathan.mandziara=cambiumnetworks....@afmug.com] >>>> *On Behalf Of *canopy01 via Af >>>> *Sent:* Monday, September 22, 2014 11:38 AM >>>> *To:* Cambium Dist_List (af@afmug.com <mailto:af@afmug.com>) >>>> *Subject:* [AFMUG] New PMP beta load 13.2 Build 30 available! >>>> >>>> � >>>> >>>> Folks, >>>> >>>> � >>>> >>>> PMP Beta load 13.2 Build 30 is now available for download and >>>> you can find it here: >>>> >>>> � >>>> >>>> https://support.cambiumnetworks.com/files/pmp450 >>>> >>>> � >>>> >>>> * Improvements for MIMO-A >>>> o PMP450 APs & SMs will now default to MIMO-A control >>>> message mode >>>> o If you have an interop sector (containing 430 SMs), you >>>> may need to set this back to legacy SISO mode >>>> + Configuration -> Radio -> PMP 430 Interop Mode, set >>>> to SISO >>>> + This is only necessary if you have issues with >>>> existing PMP430�s reconnecting and should not be >>>> necessary in a majority of the cases. >>>> * Fix for missing "None" frequency option >>>> * Control Slots is now called Contention Slots >>>> * Addition of "Color Code Priority" column to the Session >>>> Status -> Session tab >>>> o If Color Code Rescan option is enabled on the AP, and an >>>> SM is registered via a non-primary color code, there >>>> will be a countdown for each SM that will be rescanning >>>> due to this configuration. >>>> o If an SM is registered via Installation Color Code >>>> (ICC), this will also be noted on the Session Status -> >>>> Device tab, Session column, next to "In Session" >>>> * Added number of VCs in use next to Subscriber Count on the >>>> AP's main page. �This number includes Broadcast and >>>> Multicast (if enabled) VCs. >>>> * Added support to NAT to handle fragments (to fix the >>>> FemtoCell issue) >>>> * Alignment tone fix >>>> * Various bug fixes >>>> >>>> � >>>> >>>> � >>>> >>>> Corey >>>> >>>> � >>>> >>>> � >>>> >>> >>> >>
