Can you make the SMs wideband?


Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com  
@aeronetpr






On 10/3/14, 8:08 AM, "Matt Mangriotis via Af" <af@afmug.com> wrote:

>We are actively working on new hardware for the PMP 450 platform that
>will support this band.  We expect it to become available in Q2, 2015.
>
>Matt
>
>-----Original Message-----
>From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathew Howard via Af
>Sent: Thursday, October 02, 2014 2:02 PM
>To: af@afmug.com
>Subject: Re: [AFMUG] PMP450 in 5.1 - 5.3 ???
>
>I don't believe that's the case anymore... with firmware 2.2, ePMP is
>letting me set it up to 30dBm EIRP, which is the max that anything is
>allowed in the DFS bands.
>
>________________________________________
>From: Af [af-boun...@afmug.com] on behalf of Kurt Fankhauser via Af
>[af@afmug.com]
>Sent: Thursday, October 02, 2014 11:43 AM
>To: af@afmug.com
>Subject: Re: [AFMUG] PMP450 in 5.1 - 5.3 ???
>
>epmp has alot lower powet in dfs than 450
>
>Sent from my iPhone
>
>Kurt Fankhauser
>Wavelinc Communications
>P.O. Box 126
>Bucyrus, OH 44820
>http://www.wavelinc.com
>tel. 419-562-6405
>fax. 419-617-0110
>
>> On Oct 2, 2014, at 11:46 AM, Gino Villarini via Af <af@afmug.com> wrote:
>>
>> How they managed to do it in the Epmp and PTP650 while not in the
>> PMP450 baffles meŠ.
>>
>>
>>
>> Gino A. Villarini
>> President
>> Aeronet Wireless Broadband Corp.
>> www.aeronetpr.com
>> @aeronetpr
>>
>>
>>
>>
>>
>>
>> On 10/2/14, 11:25 AM, "Matt via Af" <af@afmug.com> wrote:
>>
>>>> I believe a second HW model is planned for 4.9 ­ 5.3, different
>>>> filtering.
>>>
>>> Just what we needed, another part number to find room for in the
>>> service vehicles.  Too bad they could not have done this on same
>>> hardware.
>>>
>>>
>>>>
>>>> From: Gino Villarini via Af
>>>> Sent: Thursday, October 02, 2014 4:23 AM
>>>> To: af@afmug.com
>>>> Subject: [AFMUG] PMP450 in 5.1 - 5.3 ???
>>>>
>>>> Are there any plans for this? Is the HW capable?
>>>>
>>>>
>>>>
>>>> Gino A. Villarini
>>>> President
>>>> Aeronet Wireless Broadband Corp.
>>>> www.aeronetpr.com
>>>> @aeronetpr
>>
>

Reply via email to