Got it! Makes sense From: Af [mailto:af-boun...@afmug.com] On Behalf Of timothy steele via Af Sent: Wednesday, October 08, 2014 10:48 PM To: af@afmug.com Cc: af@afmug.com Subject: Re: [AFMUG] New ePMP Beta Software 2.3-RC10 available!
If you turn Airmax off on your UBNT AP's you can slowly swap all CPE's to Epmp then change AP to Epmp that is what wifi mode is for — Sent from Mailbox<https://www.dropbox.com/mailbox> On Wed, Oct 8, 2014 at 10:29 PM, Paul McCall via Af <af@afmug.com<mailto:af@afmug.com>> wrote: What is the perceived application for the SM operating in standard WiFi mode ? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sriram Chaturvedi via Af Sent: Wednesday, October 08, 2014 7:09 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] New ePMP Beta Software 2.3-RC10 available! Folks, ePMP Beta software 2.3-RC10 is now available for download here: https://support.cambiumnetworks.com/files/epmp System Release 2.3 adds the following features: • 5 MHz and 10 MHz channel bandwidth support o Max number of subscribers is limited to 30 for 5MHz and 60 for 10 MHz • SM Wi-Fi mode support (Only 20 MHz and 40 MHz channel bandwidths) o SM can operate in standard Wi-Fi mode • Broadcast Traffic Shaping (Limiting) o Ability to limit the number of broadcast packets per second • Multicast VLAN and Prioritization o Multicast VLAN support with prioritization o Ability to leave/join multicast groups and limit number of multicast groups to up to 5 groups o Support for IGMPv3 snooping • CLI access via ssh (default credentials: admin/admin) • Option to set SM Max Tx power manually Please post any feedback on the ePMP Beta Forum! http://epmpbeta.community.cambiumnetworks.com/ Thanks, Sriram
