Regarding the garage door opener interference, remember that LED bulbs have a 
switchmode power converter in the base, see for example
http://www.nxp.com/documents/data_sheet/SSL21082T.pdf
which gives the typical conversion frequency for that particular chip as 100 
kHz.



From: Nate Burke via Af 
Sent: Sunday, November 02, 2014 8:45 PM
To: af@afmug.com 
Subject: Re: [AFMUG] OT: LED bulbs at home

I just replaced 3 Dusk-Dawn Dimable ouside fixtures from 100w incandescent to 
the 100w cree LED's.  I'm only monitoring my Whole home Current, but it looks 
like it's saved about 1A draw in the overnight hours.  The LED's are much 
brighter than the Incadecents were.  

Interestingly enough, I put them in my garage door opener, and the remotes 
stopped working.  Took the bulbs back out and it's fine.  Must be some sort of 
interference with the DC Power supply that close to the antenna.  

I've also changed the 5 Flourescent light fixtures in my garage from 2 bulb 40w 
tubes to just 1 18w LED Tube.  They provide more light than the old bulbs.  
Last few bulbs I paid $12 each for off Ebay.  

At Home Depot look for the 'contractor discount'  It's on some bulbs.  I 
believe that if you buy 5 of the same SKU you get $5 off per bulb.  I think the 
60w Crees fell into that last time I was there.  

On 11/2/2014 8:31 PM, Chris Fabien via Af wrote: 
  The flood that failed on me was an "ecosmart" brand from Home Depot, FYI.

  I was just there today, and they had some on sale for under $5 a bulb. They 
also had some new "100W equivalent" ones that would probably be great for a 
garage, shop or someplace else that needs a lot of light and maybe isn't 
heated, which was always a problem for CFLs. 


  On Sun, Nov 2, 2014 at 7:20 PM, Tyler Treat via Af <af@afmug.com> wrote:

    Thanks for the insight, fellas!
    ___________________________
    Mangled by my iPhone.
    ___________________________

    Tyler Treat
    Corn Belt Technologies, Inc.

    tyler.tr...@cornbelttech.com
    ___________________________



    > On Nov 2, 2014, at 6:14 PM, Chuck McCown via Af <af@afmug.com> wrote:
    >
    > I built LEDs into the ceiling of my family room when the house was built 
5 years ago.  Ceiling is up about 25 feet, never wanted to have to get up 
there.  It will take scaffolding if it ever becomes necessary.  Have changed 
out almost all the rest too as the CFLs have died.
    >
    > I have 10 kW of grid tie solar as well.  Free air conditioning is nice 
indeed.
    > Good luck  with phillips flood style LEDs and CREE bulb types.  Most of 
them are dimmable now, that was the case for the earlier units.
    >
    > Home depot has very nice prices.  Some 60 watt equivalent for about 
$7.50. I actually had to pay a bit more to get 40 watt equivalent for the 
sconce lighting in my theater room.  The first ones were too bright, even with 
the dimmer all the way down.
    >
    > Yes, by all means use LEDs.
    >
    > -----Original Message----- From: Tyler Treat via Af
    > Sent: Sunday, November 02, 2014 2:00 PM
    > To: Animal Farm
    > Subject: [AFMUG] OT: LED bulbs at home
    >
    > Anyone using LED replacement bulbs in their house yet?
    >
    > Seems like a good idea for a couple lights I have that burn 24/7, but at 
$20/bulb and the CFL debacle, I want to get this right the first time.
    >
    > ___________________________
    > Mangled by my iPhone.
    > ___________________________
    >
    > Tyler Treat
    > Corn Belt Technologies, Inc.
    >
    > tyler.tr...@cornbelttech.com
    > ___________________________
    >

Reply via email to