http://www.wirelessestimator.com/emergency/
Fill out the form online, print it, and take it with you. Meets all of
the OSHA requirements and it's easy.
Mark
On 11/12/14, 8:42 AM, Tyson Burris @ Internet Communications Inc via Af
wrote:
Dan,
We don’t have a project manager or foreman either.
Yes, you are correct most guys SHOULD know the area. However, I
quickly came to learn that most guys DON’T.
For example, can most guys give the actual address to a tower or
grain leg? I found out that NO they cannot.
Hell, I am a WISP owner and can’t.
Several years ago, I created a document that is transported in the
service trucks. It contains the names of each tower, address, GPS
data, equipment on tower, height and local hospital name, address and
phone number. In the event of an accident, this data can be quickly
referenced. We do have ‘safety meeting’ sheets that list person in
charge, weather, safety concerns in area and on tower. We also have a
signature sheet for each person on site to acknowledge the meeting
took place and they are aware of document to reference in the event of
an emergency. (I can admit this sheet is rarely used unless we bring
a third party in to help…at which point I require it to protect myself)
In terms of towers, again you are correct. Tower certification is a
big PROBLEM in our industry. I had a sales representative from Crown
tell me our industry lacked safety requirements and installation
standards. I couldn’t really argue that point given what I have seen.
*Tyson Burris, President**
**Internet Communications Inc.**
**739 Commerce Dr.**
**Franklin, IN 46131**
***
*317-738-0320 Daytime #*
*317-412-1540 Cell/Direct #*
*Online: **www.surfici.net*
ICI
*What can ICI do for you?*
*Broadband Wireless - PtP/PtMP Solutions - WiMax - Mesh Wifi/Hotzones
- IP Security - Fiber - Tower - Infrastructure.*
**
*CONFIDENTIALITY NOTICE: This e-mail is intended for the*
*addressee shown. It contains information that is*
*confidential and protected from disclosure. Any review,*
*dissemination or use of this transmission or its contents by*
*unauthorized organizations or individuals is strictly*
*prohibited.*
*From:*Af [mailto:[email protected]] *On Behalf Of *Daniel White via Af
*Sent:* Tuesday, November 11, 2014 10:27 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] OSHA Written Safety Plan for WISPs
Tyson,
Playing Devil’s advocate here.
What do you discuss during the pre-climb safety meeting?
It’s your network – and the average WISP network is regional (usually
contained to one state). The guys you’re climbing with know where the
closest hospitals are, what the capabilities of the local fire
department is, what local fauna and flora to look out for, etc. etc.
I guess its good prep to make sure that someone knows what the weather
looks like today, and for the project manager (not that the average
WISP seems to have a crew foreman on most climbs) to give out the
tasks for the day.
I never did one in my WISP days – because by the time we had rolled up
to the site we all knew what to do to hit the ground running. On the
cellular side, when you might visit a site once in your career at a
company I see lots of value of the pre-climb meeting.
Of course I didn’t get tower climbing certified until after I was done
with my WISP days… which I hate to say is a problem for the industry
in general. What you don’t know can certainly kill you in this line
of work.
In my integration days… was a whole different story. I’ve seen many
integrators do them… but they are very uncommon in the WISP industry
from my personal experience.
I’d bet a group like Safety One could point you in the right direction
to making an OSHA compliant plan for your WISP.
Daniel White
(303) 746-3590
*From:*Af [mailto:[email protected]] *On Behalf Of *Tyson Burris @
Internet Comm. Inc via Af
*Sent:* Tuesday, November 11, 2014 6:51 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] OSHA Written Safety Plan for WISPs
For WISPs, you need to focus on the OSHA content related to
construction. I require OHSA 10, at a minimum, for all employees now,
including CPR CERT. Everyone in our industry should be doing a pre
climb safety meeting as well but I have yet to see ANYONE do it.
I'm not an expert here at all but that's what what I was taught from
the cellular side.
Sent from my iPhone
On Nov 11, 2014, at 6:35 PM, Josh Reynolds via Af <[email protected]
<mailto:[email protected]>> wrote:
We climb towers and are on roofs all day, which is why I asked.
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com <http://www.spitwspots.com>
On 11/11/2014 02:15 PM, Chuck McCown via Af wrote:
Yes, but for manufacturing, not the WISP.
*From:*Josh Reynolds via Af <mailto:[email protected]>
*Sent:*Tuesday, November 11, 2014 2:29 PM
*To:*[email protected] <mailto:[email protected]> ; WISPA General List
<mailto:[email protected]>
*Subject:*[AFMUG] OSHA Written Safety Plan for WISPs
Has anybody had one of these done before? Do you know any
resources specific to our industry that could help with this?
Thanks
--
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com <http://www.spitwspots.com>
--
Mark Radabaugh
Amplex
[email protected] 419.837.5015 x 1021
