We looked at all the recent changes than went in to 13.2 but did not find anything that would explain this behavior. Also tried to recreate it in the lab on a 2.4 GHz setup, but the SM kept all the checked frequencies after upgrade from 13.1.3 to 13.2.
Has anyone else upgraded a 2.4 GHz sector and run into this issue (or did not run into this issue)? Rajesh Vijayakumar Cambium Networks On Thu, Nov 13, 2014 at 10:45 PM, Aaron Schneider via Af <[email protected]> wrote: > We are investigating the other issues, but with respect to 5767.5 and > 5807.5, those two were affected by a bug fix, in that pre-13.2, 5767.5 was > actually enabling 5767.20, due to an obvious typo in the scan list code, > and 5807.5 was actually enabling 5807.00, due to another typo bug in the > code. So correcting these two items may have left them unchecked on an > upgrade to 13.2, but they weren’t valid scan frequencies anyways. > > > > These two updates didn’t make the release notes due to an oversight. > These two frequency updates are in no way related to what is being reported > for the 2.5MHz center channels coming back unchecked for 2.4. we are > investigating. > > > > -Aaron > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *George Skorup > (Cyber Broadcasting) via Af > *Sent:* Thursday, November 13, 2014 9:25 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 13.2 Issue (Removing frequency checkboxes) > > > > 13.2 on the SM definitely does not jive with build 32 on the AP. So.. > don't do that. I forgot I still had that AP on build 32 until it was too > late. SMs would pop in session for about 2 seconds and go down again. > Luckily updating the AP to 13.2 official fixed it. > > I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of them > only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers whenever I can > since I've noticed exactly what you guys are seeing here in the past, ALL > of the 2.5 centers disappear. I don't use 5MHz bandwidth, and I usually > lock the scan list on the SM down to the band the AP is operating in. So > maybe that's why I was losing only a couple freqs. > > On 11/13/2014 9:12 PM, Ryan Ray via Af wrote: > > It's crazy. No warning, no release notes about it. How does this come > out of all the betas and you lose your SM's because a frequency isn't > checked... > > > > On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected]> > wrote: > > Yeah I noticed that same with 5Ghz looks like they unchecked the rarely > used channels in SM with 13.2 programmer was probably thinking he was > helping but lots are going to complain > > > — > Sent from Mailbox <https://www.dropbox.com/mailbox> > > > > On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected]> wrote: > > Just did a >200 group of SM's and the upgrade has removed frequencies > that were previously checked. I followed the guide and did the SM's first > and AP's last. Luckily the majority of these can see another AP but what > the fuck... > > > > About half of these SM's were on 13.2(34) and the other half were on > 13.1.3... > > > > This is what it looks like after an update > > > > <image.png> > > > > > > Pre update they were all > > > > <image.png> > > > > > > URG > > > > > > >
