We do only bridge mode and DHCP to the customer's equipment. But I do
check the PPPoE filter because it lets me easily see when a customer's
router is configured for PPPoE (Stats > Filter). I also use the filters
for BootP server, SNMP, SMB and multicast. This is some of the best
stuff about Canopy. So I would prefer the ePMP to work like Canopy, for
the most part anyway.
On 11/18/2014 3:13 PM, Matt via Af wrote:
I am Dan Sullivan and I am the software manager for ePMP at Cambium.
Why do you want to filter PPPoE? Can you explain the use case more for me.
When our SM is set up as a PPPoE client and is talking to a PPPoE server, it
will only accept traffic from the PPPoE server over the wireless interface.
With this in mind, why do you need a PPPoE filter for the wireless interface?
One other item, when NAT mode is enabled we can set up a L2 filter for a source
MAC and EtherType as indicated below, but only the source MAC filter will work.
There is a warning message that indicates this when in NAT mode.
I think the desired affect is the same as:
On Canopy 450 SM
"Config / Protocol Filtering"
"Packet Filter Configuration"
Packet Direction: Filter Direction Upstream Checked
Packet Filter Types: Check Everything BUT "PPPoE"
This way the customer router/PC they plug into the ethernet port on
the SM can only successfully send PPPoE traffic onto our network.