I’m going to try this out as soon as I can get a 450AP 3.65 on the site. Question - the comment about CMM timing source. Was this ‘it works best if all devices have the same timing source’ or is there something specific to the CMM itself? Is ask because we usually use LMG CTM’s at these sites. The timing all comes from the same timing source, but it’s not your CMM.
Mark > On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af <af@afmug.com> wrote: > > We are looking specifically for beta coverage on PMP320 co-location. If > anyone is trying this or have specific questions, please let us know. You can > also contact me off-list at rajesh.vijayaku...@cambiumnetworks.com > <mailto:rajesh.vijayaku...@cambiumnetworks.com>. > > Rajesh Vijayakumar > Cambium Networks > > On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af <af@afmug.com > <mailto:af@afmug.com>> wrote: > AF Community, > > > > Please visit the Cambium Networks webpage to down load the Open Beta version > of 13.3 for PMP450 and PTP450 radios. > > > > https://support.cambiumnetworks.com/files/pmp450/beta > <https://support.cambiumnetworks.com/files/pmp450/beta> > https://support.cambiumnetworks.com/files/ptp450/beta > <https://support.cambiumnetworks.com/files/ptp450/beta> > PMP320 Co-location (5ms Frame support) (This will work on all bands, but > intended for 3.5 and 3.65 at this time.) > 7MHz Channel Bandwidth for 3.5 and 3.65 radios > Removal of the PTP450 Map for faster link speeds > SNMPv3 > HTTPS > Ability to turn off Telnet, FTP and TFTP > Read-Only Accounts for Admin, Install, and Tech > Sector SA > Export of Sessions Status Page > Config File export/Import for AP/BHM and SM/BHS > NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on > CMM synch sources. Cambium is writing a paper on how to adjust the radios to > best deal with other synch sources, although the radios will still work > together without adjustment with some impact to throughput. > > We look forward to you feedback on this release either in this forum or at: > > http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta > <http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta> > > > Best, > > Cambium Jonathan > > > >
