Like this, Kade? http://www.amazon.com/SAS-Safety-6603-Thickster-Textured/dp/B0002STTW0
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 3, 2014 at 3:38 PM, Kade Sullivan via Af <af@afmug.com> wrote: > A trick our tower climbers taught me is to wear a pair of the thick latex > 5mm+ gloves underneath a set of lighter, tighter stretchy winter gloves. > This allows you to retain much more dexterity without sacrificing much > warmth. Ever since using this trick, i RARELY get cold fingers. I can > typically make a set of the rubber gloves last a couple days of taking them > on and off. You can pick up a 500 pack for pretty cheap. They are usually > a sweet black or purple color. Very stylish. It goes against everything > I've been taught as far as winter clothes and breath-ability, but it > actually works. Your hands will be sweaty, but warm. You also will be > able to hold bolts and nuts. The other added benefit is that if you have > to remove your gloves to do something like put an ethernet end on, you just > leave the rubbers on and slip your outter glove off. Your hand doesnt get > cold near as fast because it's blocked from the wind somewhat. > > I have since told a couple friends that work out in the cold all day long > doing construction, and they now buy those gloves by the case. > > On Wed, Dec 3, 2014 at 10:42 AM, Jaime Solorza via Af <af@afmug.com> > wrote: > >> I have used Ironclad for years. For climbing I use the Box Handlers >> >> Jaime Solorza >> On Dec 2, 2014 8:12 PM, "Jay Weekley via Af" <af@afmug.com> wrote: >> >>> Now that we're approaching Winter in the great white North Alabama and >>> Christmas is near I need some good cold weather gloves. Normally, the >>> coldest we work in is the 20's (Fahrenheit) and I really would like to find >>> something that allows me to work with small tools with reasonable dexterity >>> but keep my hands warm. Any suggestions? Am I being unrealistic? >>> >> >
