5.26 is our current "standard" on X86 MT routers. Run times are very
high with no reboots.
You might just stick a buffer router in between the DVR and this
troubled router. Or find a different DVR or change the configuration on
the DVR.
I presume the reboots stop when the DVR is not connected?
--
bp
<part {dash} 15 {at} SkylineBroadbandService {dot} com>
On 12/18/2014 2:11 PM, Travis Johnson via Af wrote:
Hi,
We are having a strange issue with a Mikrotik x86 based router (v5.26
OS). We have already replaced the entire hardware with brand new
(including power supply).
The issue is the MT box will just randomly reboot with no error
messages or warning, with uptimes ranging from 30 minutes to 2 hours.
The entire problem started when we purchased a Zmodo NVR (it's a
security camera DVR system that uses PoE cameras, running Linux) and
plugged it into the Cisco switch that then connects to the MT. This is
a very basic setup. Internet connection on ether1, inside NAT'd
connections on ether2.
Anyone ever seen anything like this? Any ideas? Torch doesn't show
anything strange.
Travis
