The US version only allows US and Canada country codes.. Export radios allow other country codes as well. In both cases once you have selected a country code it locks to that unless you factory reset in which case you can select a country again.
You can generally tell by the box it was shipped in, if it has a –US or not on the end.. Peter Kranz Founder/CEO - Unwired Ltd www.UnwiredLtd.com <http://www.unwiredltd.com/> Desk: 510-868-1614 x100 Mobile: 510-207-0000 pkr...@unwiredltd.com <mailto:pkr...@unwiredltd.com> From: Af [mailto:af-boun...@afmug.com] On Behalf Of That One Guy Sent: Thursday, January 08, 2015 10:26 AM To: af@afmug.com Subject: [AFMUG] NBM5 US vs Export identification Is there an FCC ID or is there a GUI place that will tell a guy whether he has a US version or if he has an export version, or are there still two? If it is export and you select US will it lock it the the US rules? -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925