Was it gig? I had gig problems all over so I just set my rb2011 to 100 meg.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2015 10:12 AM, "Nate Burke" <n...@blastcomm.com> wrote: > I have the Puck deployed on all radios. I have 1 site that is Syncing > off the Puck, but powered via a sync injector. I was having ethernet > issues (interface bouncing/negotiation) until I disabled Sync on that port > in the Sync Injector. It's been fine since. > > > On 1/30/2015 9:07 AM, Paul McCall wrote: > > We are installing both and using CMM, CTM, SyncInjectors until something > stops working S.O.P. and then have the pucks to use to get us by. Saved us > many tower climbs already. As a rule, we keep the back to back APs on the > same sync source (SOP or puck) and that seems to work fine, even with the > other 2 back to back APs on the original SOP sync source. > > > > Paul > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *Josh Baird > *Sent:* Friday, January 30, 2015 9:23 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Epmp sync ? Sync injector or puck? > > > > So Cambium is basically telling people not to use SyncInjectors? Funny. > > > > I haven't heard that one before. > > > > Josh > > > > On Fri, Jan 30, 2015 at 9:15 AM, Darren Shea <darr...@ecpi.com> wrote: > > TJ, > > We’ve seen occasional issues with the ePMP APs in the field losing the > sync-over-power pulse from SyncInjectors and CTM-2Ms, and Cambium responded > to my trouble ticket with the following: “There has been extensive > discussion/testing here regarding supported/compatible third party > Sync/power sources for ePMP APs. We noticed sync compatibility issues when > using packetflux sync injectors.” > > > > My advice is to deploy with the puck antenna and use it as your primary > sync source, and keep the SyncInjector oprerational as a backup. The > onboard GPS seems to be stable, and appears to be less likely to make your > customers call you complaining, “the Internet is down!” > > > > - Darren > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *TJ Trout > *Sent:* Thursday, January 29, 2015 8:23 PM > *To:* af@afmug.com > *Subject:* [AFMUG] Epmp sync ? Sync injector or puck? > > > > Any advantges to using sync Injectors or Cmm for epmp or is the puck just > as good ? > > > > >