Upgrade everything to 13.2.1 and 5480 is checked during the upgrade process
On Friday, February 13, 2015, Craig Baird <cr...@xpressweb.com> wrote: > I have a 430 AP that I want to put on channel 5480. It was running an > 11.x firmware. If you recall, on firmware prior to 12.1.2, the first > available frequency was 5485. So, I upgraded this AP in order to be able > to set it to 5480. Problem is that after the upgrade, SMs with firmware > prior to 12.1.2 wouldn't connect because they couldn't do 5480. So, I set > the AP back to 5485 and upgraded all the SMs to 12.1.2. I then set the AP > back to 5480, only to find that the SMs still wouldn't register because the > frequency scan setting in the SMs didn't have the additional channels > checked. > > So that's my question. Is there any way to do this via CNUT on all the > SMs so I don't have to manually log into every one of them and check the > 5480 box? > > Craig > > >
