We do have one sub on a XW nanobeam running 5.6_beta talking to an XM
rocket on WDS. No issues.
bp
<part15sbs{at}gmail{dot}com>
On 3/4/2015 11:11 AM, Josh Reynolds wrote:
Not seeing this on m2 or m5 nanobeams. Maybe you had bad hardware?
:: Josh Reynolds, CIO, SPITwSPOTS - Pardon any brevity, this message
was sent via mobile device
On Mar 4, 2015 7:21 AM, Josh Luthman <j...@imaginenetworksllc.com> wrote:
I've found that Nanobeams have problems with WDS. I tried 5.5.9
and maybe 5.5.10? I emailed Ubnt but it never got anywhere.
Ended with putting up MT radios.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Mar 4, 2015 at 11:18 AM, Rory Conaway
<r...@triadwireless.net <mailto:r...@triadwireless.net>> wrote:
And I’m not seeing the problem where I have XW clients talking
to XM Rockets. Now that I think about it, I had the Powerbeam
as the station and the PowerBridge as the AP. Dang, should
have flipped that and retested. The thing that caught me off
guard is that this has been working for several months, no
issues. It just randomly went weird.
Rory
*From:*Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Josh Luthman
*Sent:* Wednesday, March 4, 2015 9:07 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Ubiquiti radios with different xm/xw
firmware
No. Different architecture.
Think compiled for Arm vs x86 Windows.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mar 4, 2015 11:05 AM, "Bill Prince" <part15...@gmail.com
<mailto:part15...@gmail.com>> wrote:
I thought the XM versus XW was just a hardware thing. Is it
possible to update a device that is on XM with XW?
bp
<part15sbs{at}gmail{dot}com>
On 3/4/2015 8:03 AM, Vince West wrote:
I am not 100% sure on this, but I have only been loading
XM firmware with NSM, Rockets and NanoBridges. For
anything newer, like the NanoBeams we have been using the
XW firmware.
I have seen pretty decent improvements on throughput in
some of my rocket APs since we did these software
upgrades. I don't have any PowerBridges in service
anymore, so I can't speak for those.
Vince West
Tower Hand
Technical Support
Shelby Broadband
148 Citizens Blvd
Simpsonville, KY 40067
Phone: 1-888-364-4232
On Wed, Mar 4, 2015 at 1:33 AM, Rory Conaway
<r...@triadwireless.net <mailto:r...@triadwireless.net>>
wrote:
I know that was some discussion on this and some people
said that mixing firmware was a problem, even with
5.5.10. I hadn’t seen the problem until about a week
ago. Had PowerBridge talking to a Powerbeam talking to a
PowerBridge which then link to a another PTP using NS5’s
and an AP on that end. It seemed to work great for
several months. A week ago, the AP at the end started
pushing through 10-20 pings and then dropping 3 pings.
After finding nothing, we pull the PowerBridge and
replaced it with a PowerBeam. Problem solved.
On the other hand, we have a boatload of NS5M’s, some with
XW firmware connected to XM Rockets. No problems so far.
Rory
