If only every product synced together... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 12, 2015 11:27 PM, "Mike Hammett" <af...@ics-il.net> wrote:
> Using sync promotes a far higher spectral efficiency than you'll ever get > out of a dynamic mode. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > ------------------------------ > *From: *"Josh Luthman" <j...@imaginenetworksllc.com> > *To: *af@afmug.com > *Sent: *Thursday, March 12, 2015 10:26:42 PM > *Subject: *Re: [AFMUG] quick Air Fiber 5X question > > 3/4 want it, it looks like! > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Mar 12, 2015 at 11:24 PM, Mike Hammett <af...@ics-il.net> wrote: > >> FWIW, I don't consider it important at all. Should not be condoning >> non-sync uses. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> ------------------------------ >> *From: *"Chuck Macenski" <ch...@macenski.com> >> *To: *af@afmug.com >> *Sent: *Thursday, March 12, 2015 9:36:08 PM >> *Subject: *Re: [AFMUG] quick Air Fiber 5X question >> >> >> Well...we have a lot on our plate right now, but, life is long. I will >> say that we generally add features when we perceive a broad market demand, >> not to simply say "me too". As they say, if you are following, the view is >> always the same :) >> >> Chuck >> >> On Thu, Mar 12, 2015 at 7:03 PM, Kurt Fankhauser <li...@wavelinc.com> >> wrote: >> >>> Cambium PTP650 can run in dynamic mode. And I was hoping this product >>> would be a PTP650 killer. >>> >>> Sent from my iPhone >>> >>> Kurt Fankhauser >>> Wavelinc Communications >>> P.O. Box 126 >>> Bucyrus, OH 44820 >>> http://www.wavelinc.com >>> tel. 419-562-6405 >>> fax. 419-617-0110 >>> >>> On Mar 12, 2015, at 7:39 PM, Josh Luthman <j...@imaginenetworksllc.com> >>> wrote: >>> >>> Well if it's dynamic it can go the other way! Following the demand. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Mar 12, 2015 7:32 PM, "George Skorup (Cyber Broadcasting)" < >>> geo...@cbcast.com> wrote: >>> >>>> Josh, I think you're missing something. If you do rings and a link >>>> goes down, more traffic starts going the other direction, or reverses >>>> completely. So IMO, 50/50 is fine because it's not full duplex and I don't >>>> want to have to flip a link from 75/25 to 25/75 (or whatever options there >>>> are). A link goes down, traffic changes and I do not want to take down yet >>>> another link to fix perhaps a temporary issue. OR cause a much larger >>>> permanent issue, e.g. config apply or reboot makes the radio(s) not come >>>> back up. >>>> >>>> And AFAIK, the AF5X isn't capable of FDD. It's not your regular >>>> airFiber with two radios, or separate Tx and Rx antennas, or whatever it >>>> is. >>>> >>>> On 3/12/2015 4:17 PM, Josh Luthman wrote: >>>> >>>> We're ISPs. Our backhauls don't really need any upstream other than >>>> the upstream needed to sustain downstream. >>>> >>>> Could you first get an idea on what the benefit would be? If it >>>> would be <5% additional bandwidth it doesn't make much sense. Sync isn't a >>>> big deal to me unless I replace ALL backhauls with af5x which just isn't a >>>> realistic possibility. >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Thu, Mar 12, 2015 at 5:13 PM, Chuck Macenski <ch...@macenski.com> >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> There are no plans for airFiber dynamic framing at the moment. It >>>>> could be done if you didn't care about having multiple units synced >>>>> together (as the framing would be changing). I don't know how much more in >>>>> one direction we could make this and meet DFS rules for those bands... Is >>>>> there a need for this? >>>>> >>>>> Chuck >>>>> >>>>> >>>>> On Thu, Mar 12, 2015 at 3:28 PM, Josh Luthman < >>>>> j...@imaginenetworksllc.com> wrote: >>>>> >>>>>> Will there be? >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> On Thu, Mar 12, 2015 at 4:23 PM, Chuck Macenski <ch...@macenski.com> >>>>>> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> No. Currently we support 50/50, 75/25, and 67/33 (either master to >>>>>>> slave or slave to master). >>>>>>> >>>>>>> Chuck >>>>>>> >>>>>>> >>>>>>> On Thu, Mar 12, 2015 at 3:04 PM, Kurt Fankhauser <li...@wavelinc.com >>>>>>> > wrote: >>>>>>> >>>>>>>> I'm talking half duplex, sorry. >>>>>>>> >>>>>>>> >>>>>>>> Kurt Fankhauser >>>>>>>> >>>>>>>> Wavelinc Communications >>>>>>>> >>>>>>>> P.O. Box 126 >>>>>>>> >>>>>>>> Bucyrus, OH 44820 >>>>>>>> >>>>>>>> http://www.wavelinc.com >>>>>>>> >>>>>>>> tel. 419-562-6405 >>>>>>>> >>>>>>>> fax. 419-617-0110 >>>>>>>> >>>>>>>> On Thu, Mar 12, 2015 at 4:02 PM, Bill Prince <part15...@gmail.com >>>>>>>> > wrote: >>>>>>>> >>>>>>>>> If you're running them full dux, you don't need no steenking >>>>>>>>> adaptive duty cycle... >>>>>>>>> >>>>>>>>> bp >>>>>>>>> <part15sbs{at}gmail{dot}com> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 3/12/2015 12:53 PM, Kurt Fankhauser wrote: >>>>>>>>> >>>>>>>>> Does the airfiber 5X (or any other variation of AF) support >>>>>>>>> adaptive duty cycle? Or am I locked down to 50/50 or 75/25 etc???? >>>>>>>>> >>>>>>>>> Kurt Fankhauser >>>>>>>>> >>>>>>>>> Wavelinc Communications >>>>>>>>> >>>>>>>>> P.O. Box 126 >>>>>>>>> >>>>>>>>> Bucyrus, OH 44820 >>>>>>>>> >>>>>>>>> http://www.wavelinc.com >>>>>>>>> >>>>>>>>> tel. 419-562-6405 >>>>>>>>> >>>>>>>>> fax. 419-617-0110 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >> >> > >