I used the ITElite once. It works fine.
I didn't like that the cover is on with 8 screws that just thread into
plastic. If you had to assemble a whole bunch of them I would try to
use a drill and adjust the torque setting just right so you don't strip
them.
The integrated unit with the WB SL Dish also worked great....I don't
remember what the gain was, but it's only $50 or so.
On 4/2/2015 12:56 PM, Darin Steffl wrote:
Hey guys,
We're evaluating the 2.4ghz ePMP for a few small sites and wondering
what you're using for 2.4 antenna on the CPE side since we don't want
to use the integrated antennas. We're looking at dishes and flat
panels and ITElite seems to have a dual polarity 19db panel for about
$90 and wondering if anyone uses something different like a similar
gain dish like nanobeam? We would buy the connectorized version of the
ePMP cpe radio. I haven't found any dishes in the 18-19db range, only
the 2 ft dishes like Rocketdish which is $140 and 24 db.
Any suggestions would be great. Thanks
--
Darin Steffl
Minnesota WiFi
www.mnwifi.com <http://www.mnwifi.com/>
507-634-WiFi
<http://www.facebook.com/minnesotawifi> Like us on Facebook
<http://www.facebook.com/minnesotawifi>
