Well here's my experience... http://imgur.com/L7S6Ypt,0YDJZ6F#1
It isn't a WB dish fyi Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Apr 2, 2015 at 1:37 PM, Adam Moffett <[email protected]> wrote: > I used the ITElite once. It works fine. > > I didn't like that the cover is on with 8 screws that just thread into > plastic. If you had to assemble a whole bunch of them I would try to use a > drill and adjust the torque setting just right so you don't strip them. > > The integrated unit with the WB SL Dish also worked great....I don't > remember what the gain was, but it's only $50 or so. > > > On 4/2/2015 12:56 PM, Darin Steffl wrote: > > Hey guys, > > We're evaluating the 2.4ghz ePMP for a few small sites and wondering > what you're using for 2.4 antenna on the CPE side since we don't want to > use the integrated antennas. We're looking at dishes and flat panels and > ITElite seems to have a dual polarity 19db panel for about $90 and > wondering if anyone uses something different like a similar gain dish like > nanobeam? We would buy the connectorized version of the ePMP cpe radio. I > haven't found any dishes in the 18-19db range, only the 2 ft dishes like > Rocketdish which is $140 and 24 db. > > Any suggestions would be great. Thanks > > -- > Darin Steffl > Minnesota WiFi > www.mnwifi.com > 507-634-WiFi > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> > > >
