This is a complicated issue.. It depends on how much isolation exist between ports on the ETI beam forming network. For the ETI BFN I use, you cannot have one radio in transmit at the same time another radio is in receive because you may exceed the allowable RF energy into the PMP450 per the PMP450 spec. I can share the bloody details if someone gets to this point and wants more.
So this means you cannot run an AP spectrum analysis due to the other radios being in transmit mode. This one of the reasons I would like to see synced PMP450 spectrum analysis where it respects the listen windows. There are other ETI BFNs have higher port to port isolation than the one I use, and might not have this problem. Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 pkr...@unwiredltd.com -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tushar Patel Sent: Monday, April 20, 2015 4:37 PM To: af@afmug.com Subject: Re: [AFMUG] ET Industries beamforming antennas I remember talking to ET, wasn't there some restrictions on ap can't be put as spectrum analyzer? Tushar > On Apr 20, 2015, at 1:15 PM, Peter Kranz <pkr...@unwiredltd.com> wrote: > > I have an 8 radio ETI PMP450 deployment up currently. Details in that review (2-parts) I posted. > > Peter Kranz > www.UnwiredLtd.com > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > pkr...@unwiredltd.com > > -----Original Message----- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds > Sent: Monday, April 20, 2015 11:03 AM > To: af@afmug.com > Subject: Re: [AFMUG] ET Industries beamforming antennas > > The quote we received was very do-able. Roughly $6,500. If they work we'll buy a lot more. > > Josh Reynolds > CIO, SPITwSPOTS > www.spitwspots.com > >> On 04/20/2015 09:54 AM, Adam Moffett wrote: >> I met with the company in New Jersey. Everything sounded awesome. We >> never pulled the trigger because they were a bit too large and a bit >> too expensive. >> I imagine you're in the same spot. >> >>> On 4/20/2015 1:48 PM, Josh Reynolds wrote: >>> Does anybody here have experience with these? >>> >>> Hit me up off list. >>> >>> Thanks > >
