I don’t think you’re understanding the situation that we are speculating is happening.
He is using Cambium QoS. However, he is seeing twice that amount of traffic destined to the customer, the SM is throwing half of it away (as it should), and as a result the customer’s service sucks. The problem is that the sender is not observing traditional congestion control, it is not backing off the sending rate when it sees high packet loss. That’s why I say it is similar to a DoS attack, someone sending far more traffic than the subscriber can receive. From: David Milholen Sent: Monday, April 27, 2015 7:05 AM To: [email protected] Subject: Re: [AFMUG] 450SM sustain bucket throttle not working.. This is why we like setting the QOS at the subscriber. If I remember the cambium burst allocation ignores tcp and udp and work strictly on a token bit system. We do not receive these complaints. The only time I hear them is if we get overloaded at the backhaul link. On 4/26/2015 8:58 PM, Ken Hohhof wrote: I think George forgot the sarcasm emoticon. Also note that the problem here is the edge provider is sending more than the customer’s plan rate, ignoring TCP congestion control. Not only does this consume Internet bandwidth over and above what the customer has subscribed to, it makes anything else the customer is trying to do on the Internet unusable because normal TCP is unusable with 50% packet loss. It is not surprising the customer calls saying his Internet is slow. There’s a saying that comes to mind, involving a 5 pound bag. From: Faisal Imtiaz Sent: Sunday, April 26, 2015 8:37 PM To: [email protected] Subject: Re: [AFMUG] 450SM sustain bucket throttle not working.. I see that the net neutrality is going to be the next boogieman under the bed for WISP's from now on... Please, please, please, correct your understanding on Net-Neutrality... It allows for one to traffic shape any and all kinds of traffic, as long as :- a) You declare your practice on your website. b) You DON"T DO IT specific to A SPECIFIC Network.. i.e. all VOIP, or all Video, or ALL Streaming.. (applying a throttle on video to netflix while allowing Hulu would be considered a violation, but applying throttle to all types of video content is NOT !) :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] ------------------------------------------------------------------------------ From: "George Skorup (Cyber Broadcasting)" mailto:[email protected] To: [email protected] Sent: Sunday, April 26, 2015 7:12:13 PM Subject: Re: [AFMUG] 450SM sustain bucket throttle not working.. So you'd be purposely slowing down or blocking legitimate traffic from an edge provider to the customer? Oh no, net neutrality violation! So when everyone starts with the 4k streaming and we're selling the customer 20Mbps, then we have to take on 40Mbps because of this!? On 4/26/2015 5:58 PM, Ken Hohhof wrote: I could justify declaring such traffic an attack and blocking the source as malicious. From: George Skorup (Cyber Broadcasting) Sent: Sunday, April 26, 2015 4:30 PM To: [email protected] Subject: Re: [AFMUG] 450SM sustain bucket throttle not working.. Yep, I see this all the time and Ken is exactly right. The Canopy QoS works exactly as designed, the AP is definitely not delivering more than the sustained rate, but is instead discarding the extra 50%. I've tested this situation thoroughly. Stick a MT simple queue in at the upstream router and the 2X rate traffic stops hitting the AP's ethernet interface, but it's still coming in at double the sustained rate farther upstream. There's no way around it except throwing bandwidth at it. This is CDN traffic. And when the customer thinks they can install one of those "internet download managers" to speed up their connection. The only thing it does is screw with TCP acks or window sizes or something which just puts more traffic on your transit just to be discarded at the congestion point (SM, queue, Procera, whatever). Gotta love it. You'd think with 70% of the internets being streaming video they'd think hmm.. maybe we can cut down on the peering congestion by NOT doing this crap. But no. On 4/26/2015 11:01 AM, Ken Hohhof wrote: Sorry to answer a question with a question, but are you measuring at the SM, or at some upstream router? The reason I ask, is I have seen some CDN traffic that does not seem to follow traditional TCP congestion control. It will send at twice the rate limit, causing 50% packet loss to its own traffic and everything else to that same subscriber. Evidently some TCP geniuses have decided to use latency rather than packet loss as the indicator of congestion, and that the objective is goodput not throughput. Works for last mile technologies like T1 and DSL with big buffers at the head end of the fixed speed serial connection, not so good with the type of rate limit queues we tend to use unless we can provision the queues with big buffers. Probably not your problem, but I thought I’d bring it up just in case. From: Kurt Fankhauser Sent: Sunday, April 26, 2015 10:50 AM To: [email protected] Subject: [AFMUG] 450SM sustain bucket throttle not working.. I have a 450 SM that is rate limited in the SM to 1500kbps download on the sustain side. I noticed last night that this customer was pulling a steady almost 3mbps download for several hours on end. How is this possible? Is there a problem with 13.2 firmware? Its a 3.65ghz SM. see attached. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 --
